Yamaha 01V96 Studio Manager Owner's Manual - Page 30

30 Chapter 6-Surround Editor Window 6 Surround Editor Window The Surround Editor window allows you to edit the surround pan position of the currently selected Input Channel. To open the Surround Editor window, choose Surround Editor from the Windows menu. 1 2 3 5 4 6 87 A CHANNEL SELECT section Channels can be selected by clicking the Channel ID and selecting from the list that appears, or by clicking the left and right Channel Select buttons. The long channel name is displayed below the Channel ID. To edit the name, click it and type. B Surround pan graph The green dot on this graph indicates the surround pan position for the currently selected Input Channel. The surround pan can be set by dragging the dot. C SURROUND MODE indicator This indicates the currently selected Surround mode: STEREO, 3-1, 5.1 or 6.1. D Surround pan position This is the current surround pan position. E LFE control This rotary control sets the level of the LFE channel. F DIV.F control (6.1)/DIV control (3-1, 5.1) This rotary control sets the amount of divergence (i.e., how the Center signal is fed to the Left, Right, and Center channels). With 6.1 surround, you can set the divergence for both the front and rear. The DIV.F control sets the amount of divergence for the front signal. G DIV.R control (6.1 only) This rotary control sets the amount of divergence for the rear signal. H LINK button (6.1 only) This button is used to link the DIV.F and DIV.R controls. Studio Manager for 01V96-Owner's Manual