Yamaha 01X Owner's Manual - Page 141
MIDI Data Format, Ports, Function Outline, Data Format, Format Details
View all Yamaha 01X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Before Using Basics Section Getting Started MIDI Data Format MIDI Data Format 1. Ports The mLAN MIDI ports 1, 4 and 5 are used to communicate via MIDI with the 01X. The mLAN MIDI ports 2 and 3 are connected directly to the MIDI-A and MIDI-B terminals of the 01X and do not communicate via MIDI with the 01X. 2. Function Outline MIDI is used with the 01X for the following purposes/programs. • Studio Manager • Controlling the DAW software • Controlling the Multi Part Editor • Recalling preset Library Scenes (via program change messages) The port-related functions are assigned to specific ports as indicated in the chart below. mLAN MIDI Port mLAN-MIDI-1 mLAN-MIDI-2 mLAN-MIDI-3 mLAN-MIDI-4 mLAN-MIDI-5 Function Remote control (Mode can be selected.) Direct connection to MIDI-A terminal Direct connection to MIDI-B terminal Studio Manager Remote control (Mode is fixed to "GENERAL." This is used for control of the Multi Part Editor, or for recalling Library Scenes by program change messages. Selection between the two is done from the Utility menu.) 3. Data Format The MIDI format to be used for each function is shown below. The explanations here pertain only to changing 01X Scenes via the mLAN MIDI Port 5. Function GENERAL LOGIC Remote Control CUBASE SONAR DIGITAL PERFORMER Studio Manager Recalling of Library Scenes Format 01X Remote General format Special format Special format Special format Special format Special format Program Change messages 3.1 Channel Messages Command Cn PROGRAM CHANGE rx/tx function rx/tx For switching the Library Scene memory 3.2 System Common Messages No relevant messages. 3.3 System Real-time Messages Command FE ACTIVE SENSING FF RESET rx/tx function rx For checking MIDI cable connection rx Clear the running status 3.4 System Exclusive Messages No relevant messages. 4. Format Details 4.1 Program Change These messages are effective only when the SHIFT + REMOTE function is set to "NO ASSIGN" (SCENE CTL). < Receiving > Data is received when PROGRAM CHANGE RX is on and the receive channel settings match. However, when OMNI is set to on, reception is enabled regardless of the channel settings. Upon reception, Library Scenes are recalled according to the settings of the Program Change Assign Table. < Transmitting > When PROGRAM CHANGE TX is on, recalling a Library Scene transmits data via the set transmit channel, according to the settings of the Program Change Assign Table. STATUS 1100nnnn Cn Program change DATA 0nnnnnnn nn Program number (0-127) 4.2 Active Sensing (FE) < Receiving > If no Active Sensing messages are received within 400 ms, MIDI communications are initialized, such as clearing the Running Status. STATUS 11111110 FE Active sensing 4.3 System Reset (FF) < Receiving > Upon reception, this initializes MIDI communications, such as clearing the Running Status. STATUS 11111111 FF System reset Reference Appendix 141 01X Owner's Manual