Yamaha 16D NUAGE I/O 16D/16A/8A8D Operation Manual - Page 18

Description of the Software Programs  LPF1 Selects the type of low pass filter for the LFE channel. Option THRU 80-24 80-24L 120-42 Description The filter is not applied. A Butterworth filter with a cutoff frequency of 80 Hz and -24 dB of attenuation. A Linkwitz filter with a cutoff frequency of 80 Hz and -24 dB of attenuation. A Butterworth filter with a cutoff frequency of 120 Hz and -42 dB of attenuation.  LPF2 Selects the type of low pass filter for the LFE channel which is sent the signal from each channel. Option THRU 80-24 80-24L MUTE Description The filter is not applied. A Butterworth filter with a cutoff frequency of 80 Hz and -24 dB of attenuation. A Linkwitz filter with a cutoff frequency of 80 Hz and -24 dB of attenuation. The filter is muted.  ATT1/2 Sets the attenuator for each channel. The setting range is from 0 dB to -12 dB.  AMP Sets the amplifier for the LFE channel. The setting range is from 0 dB to +12 dB.  Block diagram Indicates the position of each parameter in Bass Management. ATT & Delay Window        Presets For selecting, storing, and deleting the preset.  Monitor Selects the monitor for configuring the settings.  Mute on/off Turns muting of the channel on and off.  Channel Displays the channel.  Port Displays the channel port.  ATT(dB) Sets the attenuator/gain for speaker 1 and 2. The setting range is from 0 dB to -12 dB, and the smallest unit is 0.1 dB.  DELAY(ms) Sets the delay for the channel. The setting range is from 0 to 30 milliseconds, and the smallest unit is 0.02 milliseconds. 18 NUAGE I/O (16D) / NUAGE I/O (16A) / NUAGE I/O (8A8D) Operation Manual