Yamaha 5990 MCXSP10 Manual - Page 93
Remote sensor, Wake on RS-232C access, Remote control AMP ID, Remote control tuner ID, Remote
View all Yamaha 5990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
■ Remote sensor REMOTE SEN Use to activate or deactivate the signal-receiving capability of the remote control sensor on the front panel of this unit. Choices: ON, OFF • Select ON if you want to activate the signal-receiving capability of the remote control sensor. • Select OFF if you want to deactivate the signal- receiving capability of the remote control sensor. Note We recommend setting this parameter to ON in most cases. ■ Wake on RS-232C access WAKE ON 232C Use to set this unit to transmit data via the RS-232C interface when this unit is in the standby mode. Choices: Y (yes), N (no) • Select Y set this unit to transmit data via the RS-232C interface. • Select N set this unit not to transmit data via the RS-232C interface. ■ Remote control AMP ID REMOTE AMP Use to set the AMP ID of this unit for remote control recognition (see page 93). Choices: ID1, ID2 • Select ID1 when the remote control AMP library code is set to 2001. • Select ID2 when the remote control AMP library code is set to 2002. Note You need to set the corresponding remote control code for the remote control. ■ Remote control tuner ID REMOTE TUN Use to set the tuner ID of this unit for remote control recognition (see page 93). Choices: ID1, ID2 • Select ID1 when the remote control tuner library code is set to 2602. • Select ID2 when the remote control tuner library code is set to 2603. Note You need to set the corresponding remote control code for the remote control. ■ Remote control XM ID REMOTE XM Use to switch the XM-related remote control codes between ID1 and ID2. Choices: ID1, ID2 • Select ID1 when the remote control XM library code is set to 2604. • Select ID2 when the remote control XM library code is set to 2605. Note You need to set the corresponding remote control code for the remote control. ADVANCED SETUP ■ Fan operation mode FAN MODE Use to set the operation of the cooling fan of this unit. Choices: AUTO, CONT. • Select AUTO to set the fan to operate automatically according to the temperature of this unit. • Select CONT. to set the fan to operate continuously regardless of the temperature of this unit. ■ Bi-AMP BI-AMP Use to activate or deactivate the bi-AMP function. Choices: ON, OFF • Select ON if you want to activate the bi-AMP function. • Select OFF if you want to deactivate the bi-AMP function. Note When BI-AMP is set to ON, the SURROUND BACK terminals cannot be used to connect surround back speakers in that the SURROUND BACK terminals are already used for the bi-AMP connection (see page 17). ■ Video reset V-RESET Use to initialize the parameter settings for DISPLAY SET in OPTION MENU (see page 83). This feature is useful if the SET MENU items are not displayed on your video monitor due to a technical error between the CMPNT I/P setting and the capability of your video monitor. That is, if your video monitor does not support the analog video signals with 480p of resolution, the SET MENU items may not be displayed on your video monitor when CMPNT I/P is set to ON (see page 83). Choices: YES, CANCEL Note The parameter setting for DIMMER is not initialized (see page 83). ADVANCED OPERATION 89