Yamaha 6240 Owners Manual - Page 41
EFCT LVL, Panorama, Dimension, CT Width, C.Image, Decoder parameters
UPC - 027108933276
View all Yamaha 6240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
INTRODUCTION PREPARATION BASIC OPERATION ■ Straight Enhancer/7ch Enhancer only EFCT LVL Choices: High*/Low Adjusts the Compressed Music Enhancer effect level. When the high-frequency signals of the source is emphasized too much, set the effect level to "Low." To reduce the effect, set this parameter to "Low." To increase the effect, set it to "High." Decoder parameters You can customize decoder effects by setting the following parameters. For kinds of decoders, see page 26. ■ When PLIIx Music/PLII Music is selected Panorama Choices: Off*/On Adjusts the soundscape of the front sound field. Sends stereo signals to the surround speakers as well as the front speakers for a wraparound effect. Dimension Adjustable range: -3 to STD* to +3 Adjusts the difference in level between the front sound field and the surround sound field. You can adjust the difference in level created by the software being played back to obtain the preferred sound balance. The surround sound gets stronger as you make the value more negative and the front sound gets stronger as you make the value more positive. CT Width Adjustable range: 0 to 3* to 7 You can spread the center sound toward left and right according to your preference. Set this parameter to 0 for outputting the center sound from the center speaker only, or to 7 for outputting it from the front left/right speaker. ■ When Neo:6 Music is selected C.Image Adjustable range: 0.0 to 0.3* to 1.0 Adjusts the front left and right channel output relative to the center channel to make the center channel more or less dominant as necessary. Editing surround decoders/sound field programs ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 37 En