Yamaha ATS-2020 ATS-2020 Owners Manual
Yamaha ATS-2020 Manual
 |
View all Yamaha ATS-2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Yamaha ATS-2020 manual content summary:
- Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 1
bar (TV Remote Repeater function 14 Setting the auto power standby function 14 Initializing the sound bar 14 Troubleshooting 15 Specifications 20 About this manual NOTE This indicates precautions for use of the product and its feature limitations. HINT This indicates supplementary explanations - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 2
servicing to qualified service personnel. Servicing instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha try to eliminate the problem by using one of produce satisfactory results, please Troubleshooting" section at the end of this manual - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 3
manual resulting from use of this unit with a voltage other than specified. • To prevent damage by lightning, keep the power cable and outdoor antennas disconnected from a wall outlet or the unit during a lightning storm. • Do not attempt to modify or fix this unit. Contact qualified Yamaha service - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 4
sensor Within 6 m (20 ft) Mounting template * Using when attaching the sound bar to a wall Stand x 2 (For sound bar) Screw x 2 (For attaching the stand) 2 En Owner's Manual (This manual) Quick Start Guide - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 5
right, and behind the listener (p.9). • Advanced Bass Extension Processing Equipped with Yamaha's original bass boost technology, this system reproduces more powerful sound from the in movies, TV news or sports programs, etc., can be made clearer using the "clear voice" function (p.9). En 3 - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 6
Part names and functions (sound bar/subwoofer) Sound bar (front panel) Sound bar (rear panel) A Indicators Indicate the status of the sound bar. The indicators will dim automatically if no operations are performed for 5 seconds. Refer to "Operations" (p.8 to 9) and "Wireless connection with the - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 7
installation could cause the sound bar to fall, resulting in personal injury. • Do not attach the • Make sure you use commercially available screws that can support the weight of the installation (specified in Step 2 on Yamaha will bear no responsibility for any accidents caused by improper installations. - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 8
, you may disable it by connecting headphones to the headphone jack on the TV. For details, refer to the manuals of the TV. • The TV and BD/DVD input jacks support the following audio signals. − PCM (2 channel) − Dolby Digital (up to 5.1 channel) − DTS Digital Surround (up to 5.1 channel) Sound bar - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 9
the first time, if the SUBWOOFER indicator on the sound bar does not light up, see "Pairing the sound bar and subwoofer manually" (p.19) and connect the sound bar and subwoofer manually. • Once connected, the sound bar operates with the same subwoofer from the next time it is turned on. NOTE • Make - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 10
Operations Indicators The indicators on the front panel flash or light up, to indicate the operation and setting status. In this manual, illustrations of the nine in-line indicators are used for explanation. : Off : Lights up : Flashes (Example: When the STATUS indicator flashes and the TV indicator - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 11
movies, TV dramas, news programs or sports programs. Flash 3 times (enabled), enjoy powerful sound during surround playback through Yamaha's exclusive bass boost technology. Flash 3 . Flash (on mute) Decoder indication The sound bar supports the following audio signals. You can check the type - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 12
perform pairing. The operation varies depending on the device. Refer to the operation manual of the device. 3 Select "ATS-2020 Yamaha" in the Bluetooth device list on the device. If a passkey (PIN) new device. • Refer to "Bluetooth" (p.18) in "Troubleshooting" if pairing cannot be achieved. 10 En - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 13
device and sound bar within 10 meters (33 ft) of each other. • It may be necessary to select "ATS-2020 Yamaha" in the Bluetooth device list again, in the event that a connection problem occurs. You may have to change the output setting to output audio to the sound bar, depending on the Bluetooth - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 14
the sound bar, use your original TV's IR (infrared) remote control to program the sound bar, then use the set top box's remote control to operate 1 second) (more than 1 second) (more than 1 second) Result Bleep/buzzer Indicators Release (...) Successfully learned Once Lights up Failed to learn - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 15
power key for more than 1 second twice or three times. Result Bleep/buzzer Indicators Successfully learned Once Lights up Failed to learn key on the sound bar's remote control to finish learning mode. Clearing all programmed functions 1 With the sound bar turned off, hold down the LEARN key - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 16
Sending the TV's remote signal through the sound bar (TV Remote Repeater function) When the TV Remote Repeater function is enabled, the sound bar relays the TV's remote signal received by the front sensor to the rear transmitter. This function should be enabled when you place the sound bar in front - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 17
Troubleshooting Refer to the table below when the sound bar does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the sound bar, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 18
the power of the subwoofer cannot be turned on. Unplug the power cable from the AC wall outlet and contact the nearest authorized Yamaha dealer or service center. Move the subwoofer closer to the sound bar. If the situation does not improve, move the subwoofer to a location with better communication - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 19
Remote control Problem The sound bar cannot be controlled using the remote control. The TV cannot be controlled using the TV's remote control. The TV cannot be controlled - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 20
Bluetooth Problem Cannot make the sound bar paired with the Bluetooth device. Cannot make a Bluetooth connection. Cause Bluetooth is not selected as the input source. The device does not support A2DP. A Bluetooth adaptor, etc., that you want to pair with the sound bar has a password other than " - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 21
Pairing the sound bar and subwoofer manually 1 With the sound bar turned on, hold down the SUBWOOFER PAIRING the sound bar does not light up even after performing the above operation, see "Troubleshooting" (p.15). HINT • "Pairing" is the operation where the sound bar and subwoofer decide the device to - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 22
range Bluetooth version Supported protocols Supported codecs Wireless output Maximum communication distance Supported content protection method Sound without notice. This system is equipped with Yamaha's AIR SURROUND XTREME virtual sound technology that achieves superior positional, high - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 23
which communications is possible differs according to the distance between the communicating devices, the presence of obstacles, radio wave conditions and type of equipment. • Yamaha does not guarantee all wireless connections between this unit and devices compatible with Bluetooth function. En 21 - Yamaha ATS-2020 | ATS-2020 Owners Manual - Page 24
© 2014 Yamaha Corporation Printed in Indonesia ZM98650
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
U
Contents
Supplied items
......................................................................
2
Features
.................................................................................
3
Frequently asked questions
.................................................
3
Part names and functions (sound bar/subwoofer)
............
4
Installation
.............................................................................
5
Connections
...........................................................................
6
Operations
.............................................................................
8
Listening to the sound from a
Bluetooth
device
..............
10
Settings
................................................................................
12
Programming the sound bar with the TV’s remote control
(TV’s remote control learning function)
.....................................................
12
Sending the TV’s remote signal through the sound bar
(TV Remote Repeater function)
.........................................................................
14
Setting the auto power standby function
................................................
14
Initializing the sound bar
................................................................................
14
Troubleshooting
.................................................................
15
Specifications
......................................................................
20
Front Surround System
(ATS-CU2020+NS-WSW41)
Owner’s Manual
About this manual
NOTE
This indicates precautions for use of the product and its feature limitations.
HINT
This indicates supplementary explanations for better use.