Yamaha ATS-2020 ATS-2020 Owners Manual - Page 8

Connections Connect to a TV (or other peripheral device). Cautions • Make sure that the power cables of the sound bar and subwoofer are not connected to AC wall outlets when you start making connections. • Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug or terminal. 1 Connect the TV and sound bar with the optical cable (supplied). Remove the cap of the optical cable and check the direction of the plug. 2 Connect the power cables of the sound bar and subwoofer to AC wall outlets. 3 Set the TV as follows. • Set the TV volume to minimum. • Disable the TV built-in speaker output (if available). HINT • If a setting to disable the speaker output is not available on your TV, you may disable it by connecting headphones to the headphone jack on the TV. For details, refer to the manuals of the TV. • The TV and BD/DVD input jacks support the following audio signals. − PCM (2 channel) − Dolby Digital (up to 5.1 channel) − DTS Digital Surround (up to 5.1 channel) Sound bar (rear) Optical cable TV Power cable To AC wall outlet Subwoofer (rear) Coaxial digital cable (commercially available) OPTICAL OUTPUT Power cable To AC wall outlet HINT If your playback device has a coaxial digital audio output, you can connect it to the BD/ DVD input of the sound bar with a coaxial digital cable (commercially available). HDMI cable (etc.) Coaxial digital audio output (orange) Playback device (such as a BD player) Set top box 6 En