Yamaha AVX-S80 Owner's Manual - Page 15
If you want to mount a speaker, on a commercially available, speaker stand, PREPARATION
View all Yamaha AVX-S80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
PREPARATION Using the Yamaha Speaker Stand SPS-80 (option) By using the Yamaha Speaker Stand SPS-80, speakers can be placed on the floor. (Two stands make a set.) SPEAKER SETUP I If you want to mount a speaker on a commercially available speaker stand The provided mounting bracket with 1 pair of screw holes (at an interval of 60 mm) can be used to mount the speaker on a speaker stand. * Those screw holes can be used with M4 screws only. SPS-80 * The SPS-80 is not available in some areas. 60 mm 1 Attach the bracket to the bottom of the speaker by using the provided screw so that the convex part of the bracket fits in the grooved part on the bottom of the speaker as shown below. Mounting bracket Screw 2 Mount the speaker on the speaker stand by using the screw holes on the bracket. Note The mounting bracket is provided for each speaker. English 11