Yamaha CC-90 Owner's Manual - Page 15
Open/close The Control Door, Turning The Power On/off To This System, Outlet
View all Yamaha CC-90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
OPEN/CLOSE THE CONTROL DOOR When it is not necessary to operate controls inside the control door, close the door. To open or close the door, press the right edge until it clicks. TURNING THE POWER ON/OFF TO THIS SYSTEM If the AC supply lead of CTX-S90 is connected to the AC outlet, this system can be turned ON and OFF (STANDBY mode) by pressing the POWER switch on the front panel of CTX-S90 or on the remote control transmitter. * If the AC supply lead of MX-S90 is not connected to the AC OUTLET on the rear panel of CTX-S90, the POWER switch of MX-S90 must also be pressed to turn it on separately. STANDBY mode While the power is on, pressing the POWER switch (or the POWER switch on the remote control transmitter) switches the system to the STANDBY mode. (In this mode, the display shows only the time.) In this mode, main voltage is still present inside the system. If you want to switch off the system completely, disconnect the AC power plug from the AC outlet. PLAY STOP PLAY TAPE REC/PAUSE DECK PHONO/AUX A/B POWER SLEEP DISPLAY VOLUME - + 13