Yamaha CC-90 Owner's Manual - Page 42

HOW TO USE THE BUILT-IN TIMER POWER Preamplifier/Tuner DISPLAY AUTO MEMO POWER TUNER DIRECT 1 2 3 4 5 1 2 3 4 5 6 7 8 6 7 8 9 0 A TIME B PROG C TAPE D EDIT E +I0 SEARCH SKIP STOP PLAY/PAUSE DISC SKIP RANDOM REPEAT CD PRESET DOWN UP A/B/C/D/E TUNER PLAY STOP PLAY TAPE REC/PAUSE DECK PHONO/AUX A/B POWER SLEEP DISPLAY VOLUME - + SLEEP Sleep timer operation This unit can be turned off automatically. 1 Play the desired sound source. 2 Press the SLEEP button. "SLEEP" appears on the display, and soon it is replaced by "120". 3 Press the SLEEP button repeatedly until the desired sleep time appears in the display. The display will change as described below. (Time is displayed by the minute.) ↑ ↑ ↑ 120 90 60 30 ↑ ↑ OFF SLEEP (Sleep timer is off.) * The original display mode will resume about 4 seconds after the selection is made. * The SLEEP indicator illuminates to indicate that the sleep timer is on. 4 The unit will turn off automatically when the preset sleep time has passed. To confirm the sleep time setting Press the SLEEP button once. "SLEEP" appears on the display, and soon it is replaced by the remaining time of the preset sleep time. To change the sleep time While the SLEEP indicator illuminates, press the SLEEP button repeatedly until the desired time appears. To stop the sleep timer operation Press the POWER switch, or press the SLEEP button repeatedly until "OFF SLEEP" appears on the display. (The SLEEP indicator will go out.) To set the sleep time using front panel buttons First press the DISPLAY button to display the current time. Within 7 seconds, press the AUTO MEMO button. Whenever the AUTO MEMO button is pressed, the sleep time changes. Using the timer and the sleep timer at the same time 1 Prepare timer playback. (See pages 37 and 38.) * Do not turn the power of this unit off after the timer setting is finished. 2 Press the SLEEP button and set the sleep time. When the sleep timer operation finishes, the timer will function to turn the source on at the preset time. Note Do not set the timer time so that the timer will start during sleep timer operation. (Since sleep timer operation has priority, the timer will not operate.) 40