Yamaha CD-S2100 Owners Manual - Page 20
Connecting to the BALANCED OUT, jacks, Connecting the power cable, disconnecting
View all Yamaha CD-S2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
CONNECTIONS Connections ■ Connecting to the BALANCED OUT jacks Connect your amplifier with the XLR balanced input jacks. The pin assignments for these jacks are shown below. Refer to the owner's manual supplied with your amplifier and verify that its XLR balanced input jacks are compatible with the pin assignments. ■ Connecting the power cable Plug the power cable into the AC IN inlet when all connections are complete, and then plug in the power cable to the AC outlet. Rear panel of CD-S2100 1: ground 2: hot 3: cold AC IN When connecting, be sure to match the pins and insert the connector of the "female" XLR balanced cable. When disconnecting, pull out the "female" XLR balanced cable while pressing down the latch lock on the plug. Latch lock "Female" XLR connector "Male" XLR connector Supplied power cable to an AC outlet 20 En