Yamaha CD-S2100 Owners Manual - Page 23

CONNECTIONS ■ Playing back music files stored on the PC 1 Connect the PC to this unit, using a USB cable. 2 Turn on the PC. 3 Turn this unit on by pressing the STANDBY/ ON, OFF switch on the front panel. 4 Select "USB," using the SOURCE key. 5 Set the audio output destination of the PC to "Yamaha CD Player." With Windows OS: Control Panel → Sound → [Playback] tab With Mac OS: System Preferences → Sound → [Output] tab The setting may vary, depending on the operating system. For details, consult the manufacturer of your PC. ■ Adjusting the sound volume To obtain higher sound quality, set the sound volume at the PC to the maximum, and gradually increase the volume at the amplifier from the minimum to your desired level. Notes • Do not disconnect the USB cable, turn off the unit, or change the input with the SOURCE key while playback on a PC connected via the USB cable is in progress. Doing so may cause a malfunction. • To mute operation sounds of the PC during music playback, change the setting on the PC. • If music files cannot be played correctly, restart the computer and perform the mentioned procedure again. • The music files stored on a PC cannot be controlled from this unit or the remote control of this unit. Operate them on the PC. 6 Operate the PC to start playback of music files. When the music signal is fed from the PC to the unit, the sampling frequency of the file being played is indicated on the display of the unit. English 23 En