Yamaha CD S700 Owner's Manual - Page 11

PREPARATION CONNECTIONS Connecting your amplifier CAUTION • Before making any connection, switch OFF the power to the unit, the amplifier and any other component. • Connections should be made to the correct input terminals of the amplifier or another component. • If the placement of this unit causes noise to another equipment, such as a tuner, move them further away from each other. PREPARATION RCA stereo cable (supplied) Optical cable Coaxial cable Amplifier • The digital output is turned off when this unit is in PURE DIRECT mode. To connect this unit to your amplifier, choose one of the ways listed below. When the ANALOG OUT terminals of this unit are used ( ) Connect these terminals to the CD (or AUX) terminals of the amplifier by using a supplied RCA stereo cable. For details concerning these connections, refer to the operation instructions of the amplifier being used. • Be sure that the left (L) and right (R) of these terminals are connected to the corresponding (left and right) terminals of the amplifier or other component. When the DIGITAL OUT (COAXIAL) terminal of this unit is used ( ) Connect this terminal to the digital input terminal of an amplifier with a commercially available coaxial cable. When the DIGITAL OUT (OPTICAL) terminal of this unit is used ( ) Connect this terminal to the optical input terminal of an amplifier with a commercially available optical cable. • Use a reliable optical cable. 7 En English