Yamaha CDC-755 Owner's Manual - Page 23

CD SYNCHRONIZED RECORDING This unit can make a tape deck's recording synchronized with CD play automatically. With this function, you can record a CD on tape very easily and more precisely. This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck's operation manual to know whether it is compatible or not.) * This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit's remote control transmitter at the same time. 1 4 3 OPEN/CLOSE DIMMER TIME PROG TAPE REPEAT RANDOM 1 2 3 MODE 4 5 6 +10 7 8 9 0 DISC SKIP SKIP DISC SCAN PAUSE PLAY SEARCH INDEX STOP SYNCHRO - OUTPUT LEVEL + 4 5 1 Select the disc. DISC SKIP 5 PLAY 2 Load a tape on the tape deck. * The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 22.) 3 SYNCHRO This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode. * In this mode, the time display on this unit flashes on and off. 4 If necessary, select the desired track. SKIP 4 or Both CD play and tape deck recording begin. * CD play begins a little later than recording. 6 If you want to stop recording temporarily and restart recording from a desired track, follow steps 3-5 again. To cancel this function Press the STOP button. Notes • To finish or stop the recording, press the "STOP" button on the tape deck. • Programmed sequence of tracks can also be recorded with this function, instead of recording an entire disc. (Refer to page 14-15 for the programming procedure.) • This function can also be used together with the automatic tape-programming function. (Refer to page 19-21.) 23