Yamaha CDC-755 Owner's Manual - Page 9

Display information at disc play Œ Ž  5DISC 3 4 5 6 7 8 9 10 11 12 REMAIN  ‘ Œ Encloses the tray number of the selected disc.  Shows the tray numbers with discs. Ž Shows the selected track number.  Shows the time displays. (Refer to "Selecting time displays" on page 11.)  Displays the numbers that correspond to the numbers of the tracks (as high as number 20) on the selected disc. After each track is played, its corresponding number disappears so the number of remaining tracks (and their numbers) can be seen at a glance. ‘ Shows the level of signals output into an amplifier or the headphone level adjusted by using the OUTPUT LEVEL buttons. Notes q After closing the disc tray by pressing the OPEN/CLOSE button in the stop mode or after selecting any disc by using the DISC SKIP buttons, the display shows the total number of tracks and the total recorded time of the selected disc for a few seconds. 5DISC 1 2 3 4 5 6 7 8 9 10 11 12 TOTAL q Additionally, you can close the disc tray by pressing the PLAY (PLAY/PAUSE) button, a DISC-select button on the front panel, a numeric button or the RANDOM button, or by pressing the front edge of the disc tray gently. If the tray is closed in these ways, play will begin automatically, however, the display will not show the total number of tracks and the total recorded time of the first selected disc. PLAYXCHANGE During play, you can open the disc tray by pressing the PLAYXCHANGE button on the front panel without interrupting disc play. However, in this case, pressing the DISC SKIP buttons has no effect. To stop play temporarily PAUSE or PLAY/ PAUSE To resume play, press the PAUSE button again (or press the PLAY button). * The PLAY/PAUSE button on the front panel can also be used to stop play temporarily or to resume play. To stop play completely STOP 9