Yamaha CDC-902 Owner's Manual - Page 17

English CD SYNCHRONIZED RECORDING This unit can make a tape deck's recording synchronized with CD play automatically. With this function, you can record a CD on tape very easily and more precisely. This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck's operation manual to know whether it is compatible or not.) * This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit's remote control transmitter at the same time. 3 4 1 CDC-902 SYNCHRO 1 4 DIMMER TIME OPEN/ CLOSE TAPE CLEAR PROG 2 3 INDEX 5 6 +I0 7 8 9 0 DISC SCAN MODE REPEAT RANDOM DISC SKIP SEARCH - OUTPUT LEVEL + SKIP STOP PAUSE PLAY 4 5 3 4 1 CDC-502 SYNCHRO 1 4 DIMMER TIME OPEN/ CLOSE CLEAR PROG 2 3 INDEX 5 6 +I0 7 8 9 0 DISC SCAN MODE REPEAT RANDOM DISC SKIP SEARCH SKIP STOP PAUSE PLAY 4 5 1 Select a disc. DISC SKIP 4 If desired, select the track to be recorded first. 5 SKIP or 2 Load a tape on the tape deck. * CDC-902 only The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 21.) 3 SYNCHRO This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode. * In this mode, the time display on this unit flashes on and off. 5 PLAY Both CD play and tape deck recording begin. * CD play begins a little later than recording. 6 If you want to stop recording temporarily and restart recording from a desired track, follow steps 3-5 again. To cancel this function Press the STOP button. Notes q To finish or stop the recording, press the "STOP" button on the tape deck. q Programmed sequence of tracks can also be recorded with this function, instead of recording an entire disc. (Refer to page 14-15 for the programming procedure.) q CDC-902 only This function can also be used together with the automatic tape-programming function. (Refer to page 18-20.) 17