Yamaha CDC-902 Owner's Manual - Page 8

This manual describes how to operate this unit by using the remote control transmitter. To operate this unit on the front panel, use the corresponding buttons on the front panel. BASIC OPERATION 4 POWER 5 1 1 Turn the power on. POWER 2 Open the disc tray and load discs. OPEN/ CLOSE Label side upward 3 Close the disc tray OPEN/ CLOSE CDC-902 SYNCHRO 1 4 DIMMER TIME OPEN/ CLOSE TAPE CLEAR PROG 2 3 INDEX 5 6 +I0 7 8 9 0 DISC SCAN MODE REPEAT RANDOM DISC SKIP SEARCH - OUTPUT LEVEL + SKIP STOP PAUSE PLAY 2, 3 5 4 5 CDC-502 SYNCHRO 1 4 DIMMER TIME OPEN/ CLOSE CLEAR PROG 2 3 INDEX 5 6 +I0 7 8 9 0 DISC SCAN MODE REPEAT RANDOM DISC SKIP SEARCH SKIP STOP PAUSE PLAY 2, 3 5 Disc tray 4 Select a desired disc play mode (1DISC or 5DISC) confirming it on the display. MODE 1DISC 5DISC Shows the selected disc mode. "1DISC" mode: The unit will play a designated disc only. "5DISC" mode: The unit will play all discs on the tray in sequence. 5 Start play from the first track of the disc 1. PLAY * If necessary, select a desired disc by using the DISC SKIP button or a DISC-select button. DISC SKIP DISC 2 3 4 PLAY (On the front panel) To turn off the power Press the POWER switch again. 8