Yamaha CDC-906 Owner's Manual - Page 21
TRACK PROGRAMMING FOR RECORDING, Automatic Tape Programming
View all Yamaha CDC-906 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
FUNCTIONS FOR RECORDING TRACK PROGRAMMING FOR RECORDING This convenient feature can be used to program tracks for recording to tape. By only memorizing the tape's total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 21.) Automatic Tape Programming The unit will automatically program tracks on a disc with the original order of tracks unchanged. OPEN/ SYNCHRO DIMMER CLOSE TEXT/ TIME PEAK TAPE CLEAR PROG 3 1 2 3 4 5 6 7 8 9 0 -10 INDEX MODE - OUTPUT LEVEL - DISC SCAN DISC SKIP - - DISC SCAN REPEAT 4 DISC SKIP 2 RANDOM 5 1 1 Stop the unit. 2 Select the disc. DISC SKIP 3 Enter the tape's total possible recording time (tape length). TAPE 46 You can select any of four tape lengths by pressing the TAPE button. 46 TAPE 54 (OFF) 60 90 You can also enter the tape's total possible recording time manually. Example: For a C-64 tape (32 minutes on each side) 6 4 1 2 64 4 Press the REPEAT button. REPEAT The unit automatically programs tracks for side A and side B separately considering the tape's total time. * The programmed track numbers and the total number of tracks for side A and B are displayed for a short time. 5 Begin recording on the tape deck and press the w button at the same time. 6 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the w or d button. Notes • It is recommended that you use a tape that is slightly longer in length than the CD you are recording, because the programmed tracks on a CD may not fit properly into the time allowed on each half of the tape. • CD synchronized recording function can be used if your tape deck is compatible with it. In this case, in step 5 and 6, press the SYNCHRO button and then press the w button. Recording automatically begins. (For details, refer to page 16.) English E-17