Yamaha CLP-295GP Owner's Manual - Page 112

Attach two front legs and a rear leg., Install the pedal box., Raising the unit to the standing posi

Get Yamaha CLP-295GP PDF manuals and user guides View all Yamaha CLP-295GP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 112 highlights

2. Attach two front legs and a rear leg. Refer to the diagram below to verify the orientation of the legs. Rear leg Front leg Front leg Install and tighten four 6 x 40 mm screws on each leg, starting with one of the front legs. 3 Insert the pedal cord plug into the pedal connector. Insert the plug so the arrow side faces front (toward the keyboard). If the plug will not go in easily, do not force it. Double-check the orientation of the plug, then try again. 4 Attach the cord holder on the unit as shown in the illustration below, then use the cord holder to affix the pedal cord. 3 4 3. Install the pedal box. 1 Remove the twist tie that affixes the pedal cord to the upper portion of the pedal box. Twist tie 4. Raising the unit to the standing position. Use the front legs as support to raise the unit. CAUTION • Be careful not to pinch your fingers. • When you raise the unit, do not hold the key cover. 2 Align the cord with the groove on the unit, and attach the pedal box using four 6 x 20 mm screws. Appendix 112 CLP-295GP Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
112
CLP-295GP Owner’s Manual
Appendix
2.
Attach two front legs and a rear leg.
Refer to the diagram below to verify the orientation of
the legs.
Install and tighten four 6 x 40 mm screws on each leg,
starting with one of the front legs.
3.
Install the pedal box.
1
Remove the twist tie that affixes the pedal
cord to the upper portion of the pedal box.
2
Align the cord with the groove on the unit,
and attach the pedal box using four
6 x 20 mm
screws.
3
Insert the pedal cord plug into the pedal
connector. Insert the plug so the arrow side
faces
front (toward the keyboard).
If the plug will not go in easily, do not
force it. Double-check the orientation of
the plug, then try again.
4
Attach the cord holder on the unit as shown
in the illustration below, then use the cord
holder to affix the pedal cord.
4.
Raising the unit to the standing posi-
tion.
Use the front legs as support to raise the unit.
Rear leg
Front leg
Front leg
Twist tie
4
3
CAUTION
•
Be careful not to pinch your fingers.
•
When you raise the unit, do not hold the key
cover.