Yamaha CLP-295GP Owner's Manual - Page 69

Detailed Settings Detailed Settings Voices [VOICE SETTING] In Dual mode, parameters with the "*" mark are set for Voice 1 and Voice 2 individually. Settings Parameter name Reference page Setting the octave* Octave 78 Setting the volume level* Volume 78 Setting the position of right and left channels* Pan 78 Make fine adjustments to the pitch (only in Dual mode) Detune 78 Selecting the reverb type ReverbType 79 Setting the reverb depth* ReverbSend 79 Selecting the chorus type ChorusType 79 Setting the chorus depth* ChorusSend 79 Setting the chorus on/off ChorusOnOff 80 Selecting the DSP type* DSP Type (DSP) 80 Setting the speed of the vibraphone vibrato effect* VibeRotorSpeed 80 Turning the vibraphone vibrato effect on/off* VibeRotorOnOff (RotorOnOff) 80 Setting the rotation speed of the rotary speaker* RotarySpeed (Rot.Speed) 81 Adjusting the depth of the DSP effect* DSPDepth 81 Adjusting the brightness of the sound* Brightness 81 Adjusting the resonance effect* HarmonicContent (Harmonic) 81 Adjusting the low-range frequency of the equalizer* EQ LowFreq. (EQ L.Freq) 81 Adjusting the low-range gain (amount of boost/cut) of the equalizer* EQ LowGain 82 Adjusting the high-range frequency of the equalizer* EQ HighFreq. (EQ H.Freq) 82 Adjusting the high-range gain (amount of boost/cut) of the equalizer* EQ HighGain 82 Setting the touch sensitivity* TouchSense 82 iAFC [iAFC SETTING] Settings Turning iAFC on/off Adjusting the Dynamic Damper Effect depth Adjusting the Spatial Effect depth Calibration (automatic adjustment) Restoring the default calibration setting Parameter name iAFC DynDmpFX Depth SpatialFX Depth Calibration iAFC Default Reference page 83 83 84 84 84 CLP-295GP Owner's Manual 69