Yamaha CLP-920 Owner's Manual - Page 14
Local Control ON/OFF, Setting the Clavinova MIDI Channels
View all Yamaha CLP-920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
MIDI Functions G Setting the Clavinova MIDI Channels ZSimultaneously press and hold the A-1 and C#0 keys. XPress the key on the keyboard corresponding to the desired MIDI transmit or receive channel.* CRelease the A-1 and C#0 keys. * Keys C1 through D#2 on the keyboard are used to set the MIDI transmit channel. The E2 key turns transmission "OFF" if you don't want the Clavinova to transmit MIDI data. Keys C4 through D#5 are used to set the MIDI receive channel as shown in the illustration below. The E5 key sets the receive mode to "ALL". NOTE • When the power is initially turned ON, MIDI receive is set to the ALL mode and the transmit channel is set to 1. • In the dual mode the left-button voice will be transmitted on the specified transmit channel number while the right-button voice will be transmitted on the next channel number (i.e. the specified transmit channel number + 1). Neither voice will be transmitted when the transmit channel is set to "OFF." • Demo song data is not transmitted via MIDI. • No MIDI reception occurs when the demo song mode is engaged. • Program change and other like channel messages received will not affect the Clavinova's panel settings or what is being played on the keyboard. A-1 C#0 E2 C1 D#2 2 4 7 9 11 14 16 1 3 5 6 8 10 12 13 15 For setting the transmit channel. (C1 ~ D#2) OFF E5 C4 D#5 2 4 7 9 11 14 16 1 3 5 6 8 10 12 13 15 For setting the receive channel. (C4 ~ D#5) For ALL mode Local Control ON/OFF ... MIDI OUT Clavinova MIDI IN DOU-10 "Local Control" refers to the fact that, normally, the Clavinova keyboard controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is "Local Control ON" since the internal tone generator is controlled locally by its own keyboard. Local control can be turned OFF, however, so that the Clavinova keyboard does not play the internal voices, but the appropriate MIDI information is still transmitted via the MIDI OUT connector when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI IN connector. When using the DOU-10 Disk Orchestra Unit with the Clavinova, for example, Local Control should be turned OFF when recording using the DOU-10 voices only, and ON when recording the Clavinova voices while listening to playback of the DOU-10 voices. ZSimultaneously press and hold the A-1 and C#0 keys. XPress the C6 key to switch the Local Control between OFF and ON. CRelease the A-1 and C#0 keys. NOTE • When the power is initially turned ON, Local Control is set to "ON". A-1 C#0 C6 14 CLP-920