Yamaha CLP-920 Owner's Manual - Page 7
Connections - keyboard
View all Yamaha CLP-920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Connections CAUTION • Before connecting the Clavinova to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all-volume levels to minimum. Bottom Panel R L/L+R AUX OUT 1 R L/L+R AUX IN 2 Mac MIDI PC-1 PC-2 TO HOST 3 HOST SELECT THRU MIDI OUT IN 4 PEDAL 5 Stereo System R L/L+R AUX OUT DOU-10 R L/L+R AUX IN Personal Computer TO HOST Mac MIDI PC-1 PC-2 HOST SELECT MIDI THRU OUT IN Tone Generator DOU-10 1 AUX OUT L/L+R and R Jacks The AUX OUT L/L+R and R jacks deliver the output of the Clavinova for connection to an instrument amplifier, mixing console, PA system, or recording equipment. If you will be connecting the Clavinova to a monaural sound system, use only the L/L+R jack. When a plug is inserted into the L/L+R jack only, the left- and right-channel signals are combined and delivered via the L/L+R jack so you don't lose any of the Clavinova's sound. CAUTION • When the Clavinova's AUX OUT jacks are connected to an external sound system, first turn the Clavinova power on, and then the power to the external amplifier/speaker system. Reverse this order when turning the power off. • The AUX OUT jack signal must never be returned to the AUX IN jacks, either directly or through external equipment. • The AUX OUT jack signal is not controlled by the Clavinova's volume control. Use the volume control on the external audio equipment to adjust the level. 2 AUX IN L/L+R and R Jacks These jacks are intended for use with an external tone generator module such as the Yamaha DOU-10 Disk Orchestra Unit. The stereo outputs from the external tone generator module are connected to the AUX IN L/L+R and R jacks, allowing the sound of the tone generator to be reproduced via the Clavinova's internal sound system and speakers. A line-level mono source can be connected to the L/L+R jack. CAUTION • When the Clavinova's AUX IN jacks are connected to an external source, first turn the power to the external device on, and then the power to the Clavinova. Reverse this order when turning the power off. • The input signal from the AUX IN jacks is controlled by the Clavinova's volume control. Reverb function will have no affect. • The input signal from the AUX IN jacks is delivered to the AUX OUT jacks. 3 TO HOST Connector & HOST SELECT Switch This jack and selector switch allow direct connection to a personal computer for sequencing and other music applications - without the need for a separate MIDI interface. See page 15 for details. 4 MIDI IN, THRU and OUT Connectors The MIDI IN connector receives MIDI data from an external MIDI device (such as the DOU-10 Disk Orchestra Unit) which can be used to control the Clavinova. The MIDI THRU connector re-transmits any data received at the MIDI IN connector, allowing "chaining" of several MIDI instruments or other devices. The MIDI OUT connector transmits MIDI data generated by the Clavinova (e.g. note and velocity data produced by playing the Clavinova keyboard). More details on MIDI are given in "MIDI Functions" on page 13. 5 PEDAL Jack This terminal is for connecting the pedal cord from the pedal box (refer to the "Keyboard Stand Assembly" on pages 26-27). G PHONES Jacks (Bottom Panel) Two sets of standard stereo headphones can be plugged in here for private practice or late-night playing. The internal speaker system is automatically shut off when a pair of headphones is plugged into either of the PHONES jacks. CLP-920 7