Yamaha CRX-N470 CRX-N470/N470D Owners Manual - Page 14
Preparations, Connecting speakers
View all Yamaha CRX-N470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Preparations Connect speakers, the antenna, etc. and turn the unit on. Do not connect the power cable of the unit until you have finished connecting all cables. Connecting speakers 1 Remove the insulation from the ends of the speaker cables to expose the bare wires. 15 mm (5/8 in.) Right speaker Left speaker 12 3 2 Connect speakers to the unit, as the illustration shows. • Prepare speakers, subwoofer and speaker cables separately. • For connection of the speakers, refer to the owner's manual supplied with them. Speaker cable Monaural pin cable Subwoofer Caution • If the bare speaker wires touch each other or any metal part of the unit, it could damage the unit and/or the speakers. • Use speakers of at least 6 Ω impedance. Note • Make sure that left and right (L, R) connections and polarity (red: +, black: -) are correct. If connections are incorrect, the sound will be unnatural. • You can also connect a subwoofer to the unit (it must have a built-in amplifier). 14 En