Yamaha CRX-N470 CRX-N470/N470D Owners Manual - Page 39

Connect the unit directly with a mobile device Connect the unit directly with a mobile device wirelessly (Wireless Direct). Put up the wireless antenna of the unit in advance (& P.15). 1 Press . 2 Select [Network Config] with S/T, and press . 3 Select [Select Network] with S/T, and press . 4 Select [Direct] with S/T, and press . 5 Select desired security method with S/T, and press . • Refer to the Note at right. 6 Check the SSID and the security key. • These are required for step 7. • You can check the values from the option menu - [Network Info] - [Direct Info]. 7 Configure the Wi-Fi settings of the mobile device. • Enable the Wi-Fi function of the mobile device. • When the access points are listed, select the SSID you have checked in step 6. • When the mobile device prompts you to enter a password, enter the security key you have checked in step 6. Mobile device This unit 1 OPTION Note • The security methods selectable in step 5 are [OPEN] and [WPA2-PSK(AES)]. If [OPEN] is selected, the connection may be insecure since the communication is not encrypted. • You cannot simultaneously use this setting with a wired network connection or a wireless network connection. • When using Wireless Direct, you cannot connect the unit to the Internet. Therefore, the Internet services, such as Internet radio, are unavailable. • For details about how to set up the Wi-Fi connection of the mobile device, see the user's guide of your mobile device. 2, 3, 4, 5 /, ENTER 39 En