Yamaha CS-R5 CS-R5 Owners Manual [English] - Page 27
Other Operations
View all Yamaha CS-R5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Other Operations Initializing the unit to factory default settings If an error occurs in the unit's internal memory, or if you forget the password and cannot operate the unit, you can use the following procedure to initialize the internal memory. NOTICE When you initialize the internal memory, all content that had been saved in memory will be lost. Use caution when performing the following steps. 1. Press the SETUP button on the menu bar in the touch screen. The SETUP screen will appear. 2. Press the MAINTENANCE button. Adjusting the faders (Calibration function) Depending on the environment in which you use the system, discrepancies may occur in the motion of the motorized faders. You can use the Calibration function to correct these discrepancies. The RIVAGE PM5 system features two types of fader calibration. MOTOR DRIVE Calibration POSITIONING Calibration Automatically optimizes the motorized fader movement. Calibrates the motorized fader movement so that the fader knob positions and the level values stored in the console (parameter) will match. NOTE An alarm message will appear if a problem is detected in the fader settings while the RIVAGE PM5 system is starting up. 1. Press the SETUP button on the menu bar in the touch screen. The SETUP screen will appear. 2. Press the MAINTENANCE button. The MAINTENANCE popup window will appear. This window includes several pages, which you can switch between using the tabs located at the top of the window. 3. Press the INITIALIZATION tab. 4. You can select multiple items to be initialized as required by the desired initialization method. • SYSTEM LOG • LIBRARY • SCENE • OTHER 5. Press the INITIALIZE THIS CONSOLE button. A dialog box will ask you to confirm the operation. 6. Press the OK button in the confirmation dialog box. The Initialization operation starts. NOTE The control surface will restart after initialization. The MAINTENANCE popup window will appear. This window includes several pages, which you can switch between using the tabs located at the top of the window. 3. Press the FADER CALIB tab. The FADER CALIBRATION screen will appear, which will enable you to adjust the faders. 4. Select the tab for the desired fader calibration operation. CS-R5 Owner's Manual 27