Yamaha DD-75 DD-75 Owners Manual - Page 21
Setting the Reverb type, Change the reverb type by turning the dial.
View all Yamaha DD-75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Play the Pads/Pedals Unlit 5 Save to a Custom kit. Press the [KIT ASSIGN] button to save to a Custom Kit (the lamp turns off). You can now play the voice you have assigned to the pad/pedal. To call up the saved Custom Kit, press the [KIT] button and use the dial to select a Custom Kit number. NOTE • The Reverb Type of the currently assigned Drum Kit will be carried over. To change the Reverb type, please refer to "Setting the Reverb type." Setting the Reverb type This control adds reverberation to the sound by simulating the natural reverberation of a concert hall. The ideal Reverb type is automatically selected whenever you select a Kit, but you can change to any of the available Reverb types, if desired. 1 Enter the Reverb type setting function. Press the [FUNCTION] button once, then press the [DRUM 3] or [BACKING] button a number of times until the "rbt" item appears. The currently selected Reverb type appears next to the "rbt" indication. 2 Change the reverb type by turning the dial. Display oFF HA1 HA2 HA3 ro1 Reverb Type Off Hall 1 Hall 2 Hall 3 Room 1 Display ro2 St1 St2 PL1 PL2 Reverb Type Room 2 Stage 1 Stage 2 Plate 1 Plate 2 3 Press the [FUNCTION] button to exit from the Function mode. DD-75 Owner's Manual 21