Yamaha DSP-A2070 Owner's Manual - Page 30
monitor out jack. VCR3 VIDEO OUT REC OUT/MONTR, Input level adjustment INPUT LVL TRIM
View all Yamaha DSP-A2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
4. Initializing parameters on a DSP program (PARAMETER INIT) You can initialize all edited parameters on a DSP program. Note that a DSP program has two sub-programs; all parameters on both sub-programs are initialized by this operation. Operating procedure This operation cannot be done without the remote control unit. After selecting this item (title) in step 2 on page 25, press the Parameter + or - key to display the DSP program numbers (1 - 12). A program number whose parameters has been changed is marked with "*". Using the Program Select keys, press the program number(s) of the parameter you want to initialize. When initialized, the "*" mark will disappear. 5. Locking DSP parameters and other adjustments (MEMORY GUARD) If you wish to prevent accidental alteration to DSP parameters or other adjustments on this unit, select "ON". In this position, they are locked and cannot be changed. The following functions on this unit can be locked by this operation. • DSP parameters • Other setting/adjustment items described in this section • ON SCREEN display key • INPUT TRIM control • FRONT, REAR and CENTER level +/- keys • TEST switch 6. Switching the VCR 3 VIDEO OUT jack to a second monitor out jack. (VCR3 VIDEO OUT REC OUT/MONTR) If you wish to connect a second monitor TV (or a projector) to this unit, select "MONTR" position. The VCR 3 VIDEO OUT jack (and S VIDEO jack also) is switched to a second monitor out jack. NOTES • Even in the "MONTR" position, the VCR 3 VIDEO IN jack can be used as a normal video signal input jack and the VCR 3 AUDIO SIGNAL IN/OUT jacks as normal audio input/output jacks. • If using the VCR 3 jacks for connecting a third video cassette recorder only, be sure to select "REC OUT" position. If the picture on the monitor is disturbed while the third video cassette recorder is functionning, "MONTR" position may be selected. If so, re-select "REC OUT" position. 7. Input level adjustment (INPUT LVL TRIM) This function is provided for all input sources. It can be controlled from 0 to +6 dB in 2 dB steps. The sound level of each input source should be the same as that of regular CDs. To adjust the input level, either press the INPUT TRIM control on the front panel (see page 24), or select the "7. INPUT LVL TRIM" in step 2 on page 25. 28