Yamaha DSP-A990 Owner's Manual - Page 17

CONNECTING TO S VIDEO JACKS If your video cassette recorder, video disc player, etc. and your monitor are equipped with "S" (high-resolution) video terminals, connect them to this unit's S VIDEO jacks, and connect this unit's S VIDEO MONITOR OUT jack to the "S" video input of your monitor. Otherwise, connect the composite video jacks from your video cassette recorder, video disc player, etc. to the VIDEO jacks of this unit, and connect this unit's VIDEO MONITOR OUT jack to the composite video input of your monitor. NOTE: If video signals are sent to both S VIDEO input and VIDEO input jacks, the signals will be sent to their respective output jacks independently. NOTE: If your unit is the General Model, be sure the NTSC/PAL switch has been correctly set to the standard that your video equipment employs. Singapore model has no switch and uses the NTSC standard, while other models without a switch use the PAL standard. Notes about the Video superimpose q If you watch a video source that is connected to both S VIDEO and VIDEO input jacks of this unit, signals of screen display information are output from only the S VIDEO MONITOR OUT jack. q When no video signal is input to either S VIDEO or VIDEO input jacks of this unit, signals of screen display information are output from both S VIDEO MONITOR OUT and VIDEO MONITOR OUT jacks with a color background. * For the General Model, if the NTSC/PAL switch on the rear panel is set to "PAL", nothing will be output from either S VIDEO MONITOR OUT or VIDEO MONITOR OUT jack in this case. Video disc player S-VIDEO OUT VIDEO OUT Video cassette recorder 1 VIDEO OUT S-VIDEO OUT VIDEO IN S-VIDEO IN S-VIDEO IN VIDEO IN VIDEO IN S-VIDEO IN VIDEO OUT S-VIDEO OUT TV/Satellite tuner S-VIDEO OUT VIDEO OUT TV/DBS Video cassette recorder 2 Monitor TV 15 English