Yamaha DSP-A990 Owner's Manual - Page 19
Connecting The Main Speakers To This Unit
![]() |
View all Yamaha DSP-A990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English CONNECTING THE MAIN SPEAKERS TO THIS UNIT Connect the MAIN speakers to the MAIN speaker output terminals of this unit. Make sure that the jumper bars between the PRE OUT and MAIN IN jacks on the rear panel are in place. It is also possible to use an external power amplifier if more power is desired. In this case, remove the jumper bars and connect the PRE OUT jacks to the INPUT jacks of a stereo power amplifier with a stereo pin cable-making sure to connect the left and right channels correctly. Connect the MAIN speakers to the speaker output terminals of the power amplifier. NOTE: If an external amplifier is used for the main speakers, it is recommended to use the MAIN speaker terminals of this unit for the rear effect speakers. Connect the REAR output jacks to the MAIN IN jacks with a pin cord. This combination is highly upgraded and ideal for the division of sound quality, because the rear channel output of the Audio/Video system is equally important as the center channel. Main speaker Power amplifier INPUT PRE OUT This unit Main speaker 17
![](/manual_guide/products/yamaha-dspa990-owners-manual-d1d3818/19.png)