Yamaha DSP-AX3200 Owner's Manual - Page 74
Remote control, Problem, Cause, Remedy, Refer
View all Yamaha DSP-AX3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
TROUBLESHOOTING I Remote control Problem The remote control does not work nor function properly. Cause Remedy Wrong distance or angle. The remote control will function within a maximum range of 6 m (20 feet) and no more than 30 degrees off-axis from the front panel. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. Reposition this unit. Refer to page 7 - The batteries are weak. Replace all batteries with new ones and press 3 RESET. The manufacturer code has not been Set the manufacturer code correctly. 38 correctly set. Try to set the other codes of the same 38 manufacturer. The remote control The batteries of this remote control and/ Replace the batteries. 3 does not "learn" new or the other remote control are too weak. functions. The distance between the two remote Place the remote controls at the proper distance. 39 controls is too much or too little. The signal coding or modulation of the Learning is not possible. - other remote control is not compatible with this remote control. Memory capacity is full. Further learning is not possible without deleting 43 unnecessary functions. Even if the manufacturer code is Program the necessary functions independently 39 correctly set, there are some models that into the programmable buttons on this unit's do not respond to the remote control. remote control using the Learn feature. Continuous functions such as volume adjustment are learned, but operate only for a moment before stopping. The learning process is incomplete. Be sure to press and hold the function button on 39 the other remote control until "OK" appears in the display window. 72