Yamaha DSP-E492 Owner's Manual - Page 20

TO PLAY A SOURCE BASIC OPERATIONS 2 3 1, 5 NATURAL SOUND AV PROCESSOR/AMPLIFIER DSP-E492 CINEMA DSP POWER EFFECT PRESET ms dB STEREO kHz MHz 0 20 40 60 SLEEP NORMAL WIDE PHANTOM l00 EFFECT OFF MEMORY AUTO PTY HOLD INFO AFFAIRS SPORT TAPE MONITOR PRO LOGIC CONCERT MONO DISCO ROCK CONCERT PS PTY RT CT EON NEWS ENHANCED VIDEO MOVIE STADIUM CONCERT HALL PRO LOGIC ENHANCED CONCERT VIDEO MONO MOVIE STADIUM DISCO ROCK CONCERT CONCERT HALL VCR TV/DBS DVD/LD TAPE (MD) MONITOR 2CH/6CH TUNER (LINE 2) CD (LINE 1) CENTER DELAY/ MODE CENTER/REAR TIME/LEVEL VOLUME l6 20 l2 28 8 40 4 60 2 0 -dB PROCESSOR SELECTOR INTERNAL EXTERNAL 1 VOLUME l6 20 l2 28 8 40 4 60 2 0 -dB Set to the "∞" position. 2 Turn on the power of this unit and other audio/video units to be used. POWER 3 Select the desired input source by using the input selector buttons. (For video sources, turn the TV/monitor ON.) VCR TV/DBS DVD/LD TAPE (MD) MONITOR 2CH/6CH TUNER (LINE 2) CD (LINE 1) * The name of the selected input source will appear on the display 4 Play the source. 5 VOLUME l6 20 l2 28 8 40 4 60 2 0 -dB Adjust to the desired output level. 6 If desired, use the digital sound field processor. (Refer to page 24.) Note Confirm that the PROCESSOR SELECTOR switch is set to the "INTERNAL" position. If it is set to the "EXTERNAL" position, switch it to the "INTERNAL" position. Notes on using the input selector buttons q Note that pressing on each input selector button selects the source which is connected to the corresponding input terminals on the rear panel. q The selection of TAPE (MD) MONITOR cannot be canceled by pressing another input selector button. To cancel it, press TAPE (MD) MONITOR again so that "TAPE MON" disappears from the display. When you select a button other than TAPE (MD) MONITOR, make sure that "TAPE MON" is not illuminated on the display. q If you select the input selector button for a video source without canceling the selection of TAPE (MD) MONITOR, the playback result will be the video image from the video source and the sound from the audio tape (or MD etc.). q Once you play a video source, its video image will not be interrupted even if the input selector button for an audio source is selected. To turn off the power Press the POWER switch again. 20