Yamaha DTX900 Owner's Manual - Page 149

Removing DIMMs, in reverse order.

Get Yamaha DTX900 PDF manuals and user guides
UPC - 086792939285
View all Yamaha DTX900 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 149 highlights

Appendix Optional DIMM Installation 5 Re-install the cover you removed in step 3, in reverse order. NOTE • When you re-install the cover, make sure to steady the cover from the side with your hand. Removing DIMMs 1 Press the ejector lever until the DIMM unlocks. 6 Check that the installed DIMMs are func- tioning properly. Set the DTX900 right-side up, and connect the AC power adaptor to the DC IN jack of the DTX900 and an AC wall outlet. Turn on the power, go to the Sampling mode by pressing the [SAMPLING] button, then press the [SF6] INF button (page 136). If the DIMMs have been installed properly, the appropriate available memory size is indicated in the display. Memory size 2 Pull the DIMM vertically out of the socket. NOTE • If the DIMMs have not been installed properly, the Sampling function will not work correctly. If this occurs, turn the power off, perform the instructions above again, and make sure to install the DIMMs firmly. Appendix 149 DTX900 Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
Optional DIMM Installation
Appendix
DTX900 Owner’s Manual
149
Appendix
5
Re-install the cover you removed in step 3,
in reverse order.
6
Check that the installed DIMMs are func-
tioning properly.
Set the DTX900 right-side up, and connect the AC power
adaptor to the DC IN jack of the DTX900 and an AC wall out-
let.
Turn on the power, go to the Sampling mode by pressing the
[SAMPLING] button, then press the [SF6] INF button (page
136). If the DIMMs have been installed properly, the appro-
priate available memory size is indicated in the display.
1
Press the ejector lever until the DIMM
unlocks.
2
Pull the DIMM vertically out of the socket.
NOTE
•
When you re-install the cover, make sure to steady the cover from the
side with your hand.
NOTE
•
If the DIMMs have not been installed properly, the Sampling function
will not work correctly. If this occurs, turn the power off, perform the
instructions above again, and make sure to install the DIMMs firmly.
Memory size
Removing DIMMs