Yamaha DTX900 Owner's Manual - Page 23
Resetting the User Memory to the Initial Factory Settings, Trigger Setup List - usb
UPC - 086792939285
View all Yamaha DTX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Setting Up ■ Trigger Setup List No. PRE: 01 PRE: 02 PRE: 03 PRE: 04 PRE: 05 Name XP Wide XP Normal SP Wide SP Normal SP Narrow PRE: 06 STD Wide PRE: 07 STD Normal PRE: 08 STD Narrow PRE: 09 DT10/20 USR: 01 - 05 User Trigger For DTX950K/ 900K For DTXTREME III Special Drum Set For DTXTREME III Standard Drum Set - - Description Wide dynamic range. This setting is designed for maximum expressive control, allowing performance subtleties over a wide dynamic range. Normal setting Wide dynamic range. This setting is designed for maximum expressive control, allowing performance subtleties over a wide dynamic range. Normal setting Controlled dynamic range delivers stable trigger detection. This setting is designed for producing a smoother, more uniform sound with reduced volume fluctuations. Wide dynamic range. This setting is designed for maximum expressive control, allowing performance subtleties over a wide dynamic range. Normal setting Controlled dynamic range delivers stable trigger detection. This setting is designed for producing a smoother, more uniform sound with reduced volume fluctuations. Use for DT10/20 drum trigger systems applied to acoustic drums. Allows creation of custom trigger setups. * In the default setting, "PRE: 01 XP Wide" for DTX950K/900K is selected. Resetting the User Memory to the Initial Factory Settings The original factory settings of this instrument's User Memory (page 76) can be restored as follows. For each of all modes, you can set whether or not User Memory data is initialized. NOTICE • When the factory settings are restored, all the data you created in each mode will be erased. Make sure you are not overwriting any important data. Be sure to save all important data to a USB storage device before executing this procedure (page 114). 3 Move the cursor to the checkbox of the desired mode then enter or remove the checkmark by using the data dial, [INC/ YES] button or [DEC/NO] button. 1 Press the [UTILITY] button to enter the Utility mode. 4 Press the [ENTER/STORE] button. The display prompts you for confirmation. Press the [DEC/NO] button or [EXIT] button to cancel the operation. 2 Press the [F6] FACTSET button to call up the Factory Set display. 1 1 Checkbox If you enter a checkmark for a mode name in the display (in step 3 below), executing the Factory Set will reset the User Memory data or settings of the corresponding mode to the initial factory settings. For those modes without checkmarks, the User Memory data or settings will be maintained even if Factory Set is executed. 5 Press the [INC/YES] button to execute the Factory Set operation. After the Factory Set has been completed, a "Completed" message appears and operation returns to the original display. NOTICE • For Factory Set operations that take longer to process, a message "Executing..." or "Please keep power on." appears during processing. While such a message is shown (while data is being written to Flash ROM), never attempt to turn off the power. Turning the power off in this state results in loss of all user data and may cause the system to freeze (due to corruption of data in the Flash ROM). This means that this instrument may not be able to start up properly, even when turning the power on next time. 23 DTX900 Owner's Manual