Yamaha DTXPRESS Owner's Manual - Page 52

Utility Mode 1. SYSTEM Group This sub-mode contains settings that relate to the overall DTXPRESS system. The group is divided into the following 6 pages. 1-1. Learn Mode 52 1-2. Trigger Bypass 52 1-3. Volume Mode 52 1-4. Jump to Recent Page 52 1-5. Hi-Hat Offset 53 1-6. Factory Set 53 1-1. Learn Mode This function allows selection of the pad (trigger input) you want to edit by hitting the pad when you are editing in the Trigger Setup Edit mode or Drum Kit Edit mode. Also, MIDI key on input from the MIDI IN/TO HOST jack can be used to appoint the MIDI note number in the Utility mode's User Map Setting. UT SYSTEM LearnMode=allwys q q LearnMode allwys:Always appoints according to pad/key on input. shift: Hitting a pad or key on input while holding the [SHIFT] button selects the pad or note. none: Can't appoint according to pad/key on input. 1-2. Trigger Bypass This function prohibits reception of pad signals from pads (the hihat controller too) connected to the DTXPRESS. You will not be able to produce voices or transmit MIDI data. The sequencer and tone generator will function normally. HINT Use this function when you are setting your drum kit with trigger pickup devices, or when you do not want to accidentally make a sound during song playback. UT SYSTEM Trig Bypass=ioff q q Trig Bypass off: Bypasses the trigger (does not receive). on: The trigger functions normally (receives trigger). 1-3. Volume Mode Sets the ACCOMP. VOL knob and CLICK VOL knob on the front panel. UT SYSTEM VolMode=practice q q VolMode (Volume Mode) • practice : When set to the practice mode. [ACCOMP. VOL] Using the [ACCOMP. VOL] knob as is will adjust the volume of the song accompaniment. Holding the [SHIFT] button while turning the knob will adjust the snare drum volume. [CLICK VOL] Using the [CLICK VOL] knob as is will adjust the volume of the metronome click. Holding the [SHIFT] button while turning the knob will adjust the bass drum volume. • live: When set to the Live mode. [ACCOMP. VOL] Using the [ACCOMP. VOL] knob as is will adjust the snare drum volume. Holding the [SHIFT] button while turning the knob will adjust the cymbal volume. [CLICK VOL] Using the CLICK VOL knob as is will adjust the bass drum volume. Holding the [SHIFT] button while turning the knob will adjust the volume of the drum's other instruments. 1-4. Jump to Recent Page This function lets you display the page last selected in the previous edit of the Trigger Setup Edit mode and Drum Kit Edit mode. UT SYSTEM JumpRecentPg=off q q JumpRecentPg (Jump to Recent Page) on: The display page last selected in the previous edit will appear when you enter the Trigger Setup Edit, Drum Kit Edit, Utility and Song Job modes. off: The main page of each mode will be displayed. 52