Yamaha DVD-C996 Owner's Manual - Page 14
BASIC OPERATION, Before Starting Playback
View all Yamaha DVD-C996 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
PLAYBACK BASIC OPERATION Before Starting Playback To play a disc properly, you need to adjust the formats of audio and video signals output from this unit in accordance with the equipment connected to this unit. See p.25 to 30 for more detailed information. CAUTION • Be sure to select the appropriate positions at '7 Digital Audio Output' on the SETUP MENU. Otherwise, there may be a case where digital signal which the connected equipment cannot process will be output and its noise could damage your ears and your speakers. s 6 TV Aspect Type of the connected video monitor Conventional type Widescreen type Appropriate setting 1. 4:3 2. 16:9 s 7 Digital Audio Output • To output digital signal from this unit The connected audio equipment has 96-kHz/24-bit D/A converter Dolby Digital decoder DTS decoder MPEG decoder Corresponding item 1. PCM Down Conversion 2. Dolby Digital 3. DTS 4. MPEG [Europe and U.K. models only] Appropriate setting No Bitstream Bitstream Bitstream • To output analog signal from this unit Notes • When you select 'No' at 1. PCM Down Conversion, digital signal may not be output depending on the disc you play. • Make sure to connect digital terminals of both this unit and the audio equipment as instructed on page 9. Item in '7 Digital Audio Output' 1. PCM Down Conversion 2. Dolby Digital 3. DTS 4. MPEG [Europe and U.K. models only] Appropriate setting No PCM Off PCM • Adjust some other settings such as on-screen display language, ratings, etc. as necessary. See SETUP MENU (p.25 to 30) for detail. 12