Yamaha DVD-C996 Owner's Manual - Page 31
Digital Audio Output
View all Yamaha DVD-C996 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
INTRODUCTIOIN PREPARATIONS PLAYBACK 7. Digital Audio Output U.K., Europe and Australia models Digital Audio Output 1 PCM Down Conversion No 2 Dolby Digital Bitstream 3 DTS Digital Surround Off 4 MPEG PCM Press RETURN to exit U.S.A, Canada and General models Digital Audio Output 1 PCM Down Conversion No 2 Dolby Digital Bitstream 3 DTS Digital Surround Off Press RETURN to exit DESCRIPTION OF EACH ITEM Select the appropriate position for your AV system (AV amplifier, etc.) which this unit is connected to. When you setup your AV system, you must adjust this setting before starting playback. Otherwise, there may be a digital signal which the connected equipment cannot process and the consequent noise could damage your ears and your speakers. 1 PCM Down Conversion When playing a 96 kHz linear PCM disc, you can choose whether to output high-fidelity analog signal, or convert it down to 48 kHz to output digital signal. 1 No When playing a DVD recorded in 96 kHz linear PCM, signal of 96 kHz /24 bit sampling frequency is output and you can enjoy high quality sound. If the DVD is copyright-protected, no digital signal is output unless converted to 48 kHz. • Select this position when connecting equipment without digital input. 2 Yes When playing a DVD recorded in 96 kHz linear PCM, signal is converted to 48 kHz /16 bit sampling frequency and can be output from digital output terminal even if the DVD is copyrightprotected. • It is recommended to select this position when connecting equipment with digital input.* 2 Dolby Digital To select the signal format output from this unit when playing a DVD encoded with Dolby Digital. 1 Bitstream Dolby Digital bitstream signal is output from this unit's digital output. • Select this position when connecting equipment incorporates Dolby Digital decoder. 2 PCM** Signals converted to 2ch linear PCM is output from this unit. • Select this position when connecting equipment which does not have Dolby Digital decoder. 3 DTS Digital Surround Select whether to output DTS digital signal or not. 1 Off** No digital signal is output even though the disc being played is encoded with DTS to prevent digital signal to be output. • Select this position when connecting equipment which does not have a DTS decoder. 2 Bitstream DTS bitstream is output when playing a disc encoded with DTS format. • Select this position when connecting equipment incorporates a DTS decoder. Europe, U.K. and Australia models 4 MPEG To select the signal format output from this unit when playing a DVD encoded with MPEG audio. 1 PCM** Signals converted to 2ch linear PCM is output from this unit. • Select this position when connecting equipment which dose not have a MPEG decoder. 2 Bitstream*** MPEG bitstream signal is output from this unit's digital output. • Select this position when connecting equipment incorporates a MPEG decoder. * Select 'No' if the digital audio input of your audio equipment (AV amplifier, etc.) can handle 96 kHz /24 bit signal. If it is not acceptable for 96 kHz /24 bit digital audio signal, or the 96 kHz linear PCM disc you want to play is copyright-protected, it is recommended to set '1 No' and make analog connection to enjoy high quality sound. If it is set to '2 Yes', signal is converted to linear PCM 48 kHz before being output from analog output. ** When connecting equipment which does not have decoder for each format, be sure to select this position to prevent noise output as it could damage your ears and your speakers. *** Depending on disc's capability, MPEG audio bitstream may not be output properly. SETUP MENU APPENDIX English 29