Yamaha DVX-C300SW Owners Manual - Page 14

Connections - dvx c300 manual

Get Yamaha DVX-C300SW PDF manuals and user guides View all Yamaha DVX-C300SW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Connections This section provides information on installation and connection methods for DVX-C300 speakers. For DVX-C300SW, refer to the manual provided with your speakers. Placing the speakers Placing the center speaker When placing the center speaker on top of the TV, use the supplied fasteners to secure the speaker. Hanging on a wall You can hang the speakers (front and surround only) on a wall using a commercially available bracket and screws (Diameter: 6 mm).Attach a bracket firmly to the rear of the speakers using screws. Then mount a screw on the wall where the speaker is to be hung and hook the speaker securely onto the mounted screw. Note: - Do not use screw threads measured in inches for this installation. Use metric screw threads only. Fastener Peel off the seal 1 Peel off the seals on one side of the fasteners and attach them to the bottom of the center speaker. 2 Peel off the seals on the other side of the fasteners and attach them to the top of the TV. Notes: - Do not place the speaker on the TV if the top of the TV is not level or if it is narrower than the bottom surface of the speaker. Doing so may cause the speaker to fall. In this case, place the speaker inside a TV rack or on a level floor. - Before attaching the fasteners to the TV, clean the surface with a dry cloth. A dirty or wet surface may weaken the adhesive force and cause the speaker to fall. - Do not touch the bonding surfaces of the fasteners after peeling off the seals. Doing so may weaken the adhensive force and cause the speaker to fall. Attaching to a wall You can attach the speakers (front and surround only) to a wall using commercially available screws (Diameter: 3.5 to 4 mm (1/8" to 5/32"), Length: 20 mm (25/32") or more). One speaker requires two screws.To attach all speakers to a wall, you need to prepare eight screws. Screws (3.5 to 4mm (1/8" to 5/32" dia., commercially available) 79mm (2-3/4") 79mm (2-3/4") 10mm (13/32") -+ 20mm (25/32") or more 1 Install two screws in the wall where you want to place the speaker. 2 Hang the speaker on the screws using the holes in the back of the speaker. Note: - After attaching each speaker, check that the speaker is fixed securely. YAMAHA will bear no responsibility for any accidents caused by improper installations. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
10
Placing the speakers
Connections
Placing the center speaker
When placing the center speaker on top of the TV,
use the supplied fasteners to secure the speaker.
1
Peel off the seals on one side of the fasteners and
attach them to the bottom of the center speaker.
2
Peel off the seals on the other side of the fasteners
and attach them to the top of the TV.
Notes:
–
Do not place the speaker on the TV if the top of the
TV is not level or if it is narrower than the bottom
surface of the speaker. Doing so may cause the
speaker to fall. In this case, place the speaker inside
a TV rack or on a level floor.
–
Before attaching the fasteners to the TV, clean the
surface with a dry cloth.
A dirty or wet surface may
weaken the adhesive force and cause the speaker to
fall.
–
Do not touch the bonding surfaces of the fasteners
after peeling off the seals. Doing so may weaken the
adhensive force and cause the speaker to fall.
Attaching to a wall
You can attach the speakers (front and surround
only) to a wall using commercially available screws
(Diameter: 3.5 to 4 mm (1/8” to 5/32”), Length: 20
mm (25/32”) or more). One speaker requires two
screws. To attach all speakers to a wall, you need to
prepare eight screws.
1
Install two screws in the wall where you want to
place the speaker.
2
Hang the speaker on the screws using the holes in
the back of the speaker.
Note:
–
After attaching each speaker, check that the speaker
is fixed securely.
YAMAHA will bear no responsibility
for any accidents caused by improper installations.
Fastener
Peel off
the seal
79mm
(2-3/4”)
10mm
(13/32”)
20mm (25/32”)
or more
79mm
(2-3/4”)
Screws (3.5 to 4mm (1/8” to
5/32” dia., commercially available)
+
–
Hanging on a wall
You can hang the speakers (front and surround
only) on a wall using a commercially available
bracket and screws (Diameter: 6 mm). Attach a
bracket firmly to the rear of the speakers using
screws.
Then mount a screw on the wall where the
speaker is to be hung and hook the speaker
securely onto the mounted screw.
Note:
–
Do not use screw threads measured in inches for this
installation. Use metric screw threads only.
This section provides information on installation
and connection methods for DVX-C300 speakers.
For DVX-C300SW, refer to the manual provided
with your speakers.