Yamaha DVX-C300SW Owners Manual - Page 23

Getting Started English Setting the TV IMPORTANT! Make sure you have completed all the necessary connections. (See "Connecting a TV" on page 13) 1 Press DVD/CD. ➜ "DVD CD" appears on the display panel. 2 Turn on the TV and set to the correct video-in channel. You should see the background screen on the TV. ➜ Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN or VIDEO. See your TV manual for more details. ➜ Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel. ➜ Or, the TV remote control may have a button or switch that chooses different video modes. Selecting the color system that matches your TV In order for a DVD to play on this DVD receiver, the color system of the DVD, the TV and the DVD receiver should match. Before changing the TV system, determine the color system of your TV. 1 In DVD/CD mode, press SET UP. 2 Press 3 repeatedly to select [VIDEO SETUP PAGE]. 3 Press 5∞ to highlight [TV TYPE], then press 3. MULTI - Select this if the connected TV is compatible with both NTSC and PAL (multisystem). The output format will be in accordance with the video signal of the disc. 5 Select a setting and press ENTER (OK). ➜ Follow the instructions shown on the TV to confirm the selection (if any). ➜ If a blank/distorted TV screen appears, wait for 15 seconds for auto recovery to activate. Setting the TV display Set the aspect ratio of the DVD receiver according to the TV you have connected.The format you select must be available on the disc. If it is not, the TV display setting will not affect the picture during playback. 1 In DVD/CD mode, press SET UP. 2 Press 3 repeatedly to select [VIDEO SETUP PAGE]. 3 Press 5∞ to highlight [TV DISPLAY], then press 3. VIDEO SETUP PAGE TV TYPE TV DISPLAY PROGRESSIVE PICTURE SETTING BLACK LEVEL CLOSED CAPTION 4:3 PAN SCAN 4:3 LETTER BOX 16:9 VIDEO SETUP PAGE TV TYPE TV DISPLAY PROGRESSIVE PICTURE SETTING BLACK LEVEL CLOSED CAPTION PAL NTSC MULTI 4 Press 5∞ to highlight one of the options below: PAL - Select this if the connected TV has the PAL color system. It will change the video signal of an NTSC disc and output it to PAL format. NTSC - Select this if the connected TV has the NTSC color system. It will change the video signal of a PAL disc and output it to NTSC format. 4 Press 5∞ to highlight one of the options below: 4:3 PAN SCAN - Select this if you have a conventional TV and want both sides of the picture to be trimmed or formatted to fit your TV screen. 4:3 LETTER BOX - Select this if you have a conventional TV. In this case, a wide picture with black bands on the upper and lower portions of the TV screen will be displayed. 16:9 - Select this if you have a wide-screen TV. 5 Select a setting and press ENTER (OK). TIPS: To return to the previous menu, press 2. To clear the menu, press SET UP. 19