Yamaha DXS12 Owner's Manual - Page 13

References, Specifications, Italiano, Español, Français, Deutsch, English - dimensions

Page 13 highlights

English Deutsch Français Español Italiano References References Specifications General DXR15 DXR12 DXR10 System Type 2-way, Bi-amp Powered Speaker, Bass-reflex Type Frequency Range (-10dB) 49Hz - 20kHz 52Hz - 20kHz 56Hz - 20kHz Coverage Angle Crossover Type H90° x V60° Constant Directivity Horn FIR-X tuning™ (Linear Phase FIR Filter) Crossover Frequency 2.1kHz 2.1kHz 2.3kHz Measured Maximum SPL (peak) 133dB SPL IEC noise@1m 132dB SPL 131dB SPL DXR8 57Hz - 20kHz 2.4kHz 129dB SPL DXS15 DXS12 Powered Subwoofer, Band-pass Type 45Hz - 160Hz 47Hz - 160Hz - - - 132dB SPL 131dB SPL Transducer LF Diameter Voice coil Magnet HF Diaphragm Type Magnet DXR15 DXR12 15" Cone 12" Cone 2.5" 2.5" Ferrite 1.4" 1" Throat Compression Driver Ferrite DXR10 10" Cone 2" DXR8 8" Cone 2" DXS15 15" Cone 2.5" - - - DXS12 12" Cone 2.5" Enclosure DXR15 DXR12 DXR10 DXR8 Material, Finish, Color ABS, Matte Black Floor Monitor Angle 50° Symmetrical 50° Symmetrical 50° - Dimensions (WxHxD, with rubber feet) 445×700×380 mm (17-1/2" x 27-1/2" x 15") 362×601×350 mm (14-1/4" x 23-5/8" x 13-3/4") 305×502×310 mm (12" x 19-3/4" x 12-1/4") 280×458×280 mm (11" x 18" x 11") Net Weight 22.5kg (49.6lbs) 19.3kg (42.5lbs) 14.6kg (32.2lbs) 13.5kg (29.8lbs) Handles Aluminium die-cast (Side x 2) Aluminium die-cast (Top x 1) Pole Socket 35mm with 2-way feature (0 or 7 degree) Rigging points Top x 2, Rear x 1 (Fits for M10 x 18mm eyebolts) Top x 2, Rear x 1 (Fits for M8 x 15mm eyebolts) Optional Accessory (U-bracket) UB-DXR15 UB-DXR12 UB-DXR10 UB-DXR8 DXS15 DXS12 Wood, Paint, Black - 478×618×624 mm (18-7/8" x 24-3/8" x 24-1/2") 397×563×594 mm (15-5/8" x 22-1/8" x 23-3/8") 38.0kg (83.8lbs) 33.0kg (72.8lbs) Metal (Side x 2) 35mm (Top) - - Amplifier Amplifier Type Power Rating*1 Dynamic Continuous Cooling AD/DA Signal Processing HPF/LPF DSP preset Protection Speaker Amplifier Power supply Connectors Input Output Input Impedance INPUT1 INPUT2, 3 Input Sensitivity INPUT1 (LEVEL: Maximum) INPUT2, 3 DXR15 DXR12 DXR10 Class-D 1100W (LF: 950W, HF: 150W) 700W (LF: 600W, HF: 100W) Fan cooling, 4 speeds 24bit 48kHz sampling 48bit (Accumulator: 76bit) OFF, 100, 120Hz 24dB/oct HPF D-CONTOUR: FOH/MAIN, MONITOR, OFF Clip limiting, Integral Power Protection, DC-fault Thermal, Output over current Thermal, Output over voltage, Output over current INPUT1: XLR3-31 x 1, INPUT2: Phone x 2 (Unbalanced), INPUT3: RCA PIN x 2 (Unbalanced) THRU: XLR3-32 x 1 (Parallel with INPUT1), LINK OUT: XLR x1 LINE: 12kΩ, MIC: 8kΩ L, R: 40kΩ, MONO: 20kΩ LINE: +1dBu, MIC: -32dBu -13dBu DXR8 DXS15 Class-D 950W 600W DXS12 80, 100, 120Hz 24dB/oct LPF D-XSUB: BOOST, XTENDED-LF, OFF INPUT: XLR3-31 x 2 THRU: XLR3-32 x 2 (Parallel with INPUT) 10kΩ - +1dBu - 80 DXR15/DXR12/DXR10/DXR8/DXS15/DXS12 Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22

80
DXR15/DXR12/DXR10/DXR8/DXS15/DXS12
Owner’s Manual
References
Italiano
Español
Français
Deutsch
English
References
Specifications
General
DXR15
DXR12
DXR10
DXR8
DXS15
DXS12
System Type
2-way, Bi-amp Powered Speaker, Bass-reflex Type
Powered Subwoofer, Band-pass Type
Frequency Range (-10dB)
49Hz – 20kHz
52Hz – 20kHz
56Hz – 20kHz
57Hz – 20kHz
45Hz – 160Hz
47Hz – 160Hz
Coverage Angle
H90° x V60° Constant Directivity Horn
Crossover Type
FIR-X tuning
(Linear Phase FIR Filter)
Crossover Frequency
2.1kHz
2.1kHz
2.3kHz
2.4kHz
Measured Maximum SPL (peak)
IEC noise@1m
133dB SPL
132dB SPL
131dB SPL
129dB SPL
132dB SPL
131dB SPL
Transducer
DXR15
DXR12
DXR10
DXR8
DXS15
DXS12
LF
Diameter
15" Cone
12" Cone
10" Cone
8" Cone
15" Cone
12" Cone
Voice coil
2.5"
2.5"
2"
2"
2.5"
2.5"
Magnet
Ferrite
HF
Diaphragm
1.4"
Type
1" Throat Compression Driver
Magnet
Ferrite
Enclosure
DXR15
DXR12
DXR10
DXR8
DXS15
DXS12
Material, Finish, Color
ABS, Matte Black
Wood, Paint, Black
Floor Monitor Angle
50° Symmetrical
50° Symmetrical
50°
Dimensions
(WxHxD, with rubber feet)
445×700×380 mm
(17-1/2" x 27-1/2"
x 15")
362×601×350 mm
(14-1/4" x 23-5/8"
x 13-3/4")
305×502×310 mm
(12" x 19-3/4"
x 12-1/4")
280×458×280 mm
(11" x 18" x 11")
478×618×624 mm
(18-7/8" x 24-3/8"
x 24-1/2")
397×563×594 mm
(15-5/8" x 22-1/8"
x 23-3/8")
N
et Weight
22.5kg (49.6lbs)
19.3kg (42.5lbs)
14.6kg (32.2lbs)
13.5kg (29.8lbs)
38.0kg (83.8lbs)
33.0kg (72.8lbs)
Handles
Aluminium die-cast (Side x 2)
Aluminium die-cast (Top x 1)
Metal (Side x 2)
Pole Socket
35mm with 2-way feature (0 or 7 degree)
35mm (Top)
Rigging points
Top x 2, Rear x 1
(Fits for M10 x 18mm eyebolts)
Top x 2, Rear x 1
(Fits for M8 x 15mm eyebolts)
Optional Accessory (U-bracket)
UB-DXR15
UB-DXR12
UB-DXR10
UB-DXR8
Amplifier
DXR15
DXR12
DXR10
DXR8
DXS15
DXS12
Amplifier Type
Class-D
Class-D
Power Rating
*1
Dynamic
1100W (LF: 950W, HF: 150W)
950W
Continuous
700W (LF: 600W, HF: 100W)
600W
Cooling
Fan cooling, 4 speeds
AD/DA
24bit 48kHz sampling
Signal Processing
48bit (Accumulator: 76bit)
HPF/LPF
OFF, 100, 120Hz 24dB/oct HPF
80, 100, 120Hz 24dB/oct LPF
DSP preset
D-CO
N
TOUR: FOH/MAI
N
, MO
N
ITOR, OFF
D-XSUB: BOOST, XTE
N
DED-LF, OFF
Protection
Speaker
Clip limiting, Integral Power Protection, DC-fault
Amplifier
Thermal, Output over current
Power supply
Thermal, Output over voltage, Output over current
Connectors
Input
I
N
PUT1: XLR3-31 x 1, I
N
PUT2: Phone x 2 (Unbalanced),
I
N
PUT3: RCA PI
N
x 2 (Unbalanced)
I
N
PUT: XLR3-31 x 2
Output
THRU: XLR3-32 x 1 (Parallel with I
N
PUT1), LI
N
K OUT: XLR x1
THRU: XLR3-32 x 2 (Parallel with I
N
PUT)
Input
Impedance
I
N
PUT1
LI
N
E: 12kΩ, MIC: 8kΩ
10kΩ
I
N
PUT2, 3
L, R: 40kΩ, MO
N
O: 20kΩ
Input Sensitivity
(LEVEL:
Maximum)
I
N
PUT1
LI
N
E: +1dBu, MIC: -32dBu
+1dBu
I
N
PUT2, 3
-13dBu