Yamaha DXS12 Owner's Manual - Page 9

Controls and Functions English    DXR15, DXR12, DXR10, DXR8, DXS15, DXS12  AC IN socket Connect the supplied AC power cord here. First, connect the power cord to the device, then insert the power cord plug into the AC outlet. Be sure to turn the power off before connecting or disconnecting the power cord. CAUTION  Power switch Turns the power supply on or off. Press the switch to the On position to turn the power on (0). NOTE If you are using multiple devices, turn on the power to each device individually. If you turn on the power to multiple devices simultaneously, a temporary drop in the power voltage may occur, possibly resulting in abnormal operation of the devices. CAUTION Rapidly turning the unit on and off in succession can cause it to malfunction. After turning the unit off, wait for about 5 seconds before turning it on again. Tiltable pole socket (DXR series) 7˚ 0˚ Tiltable pole socket (DXR series) This mount has two pole sockets. You can choose the angle of the DXR (mounted on a speaker pole) so that the speaker will be horizontal to the floor or tilting toward the floor by 7 degrees. 7˚ Suspended installation If you plan to suspend your DXR series speaker, attach commercially-available eye bolts to the screw holes (which are sealed at the time of shipment) located on the top (two locations) and on the lower part of the rear (one location). The size of the screw holes on the DXR15 and DXR12 is M10 (for an eye bolt length of 18mm or less). The size of the screw holes on the DXR10 and DXR8 is M8 (for an eye bolt length of 15mm or less). Keep in mind that you will need three eye bolts to suspend it. Make sure to use the eye bolts according to the standards and safety regulations in your area. Before doing any installation or construction work, consult with an installation expert. CAUTION When choosing the installation location, suspension wire and mounting hardware, make sure all are strong enough to support the weight of the speaker. Some fittings may deteriorate over extended periods of time due to wear and/or corrosion. For optimum safety, the installation should be checked thoroughly at regular intervals. Yamaha cannot be held responsible for damage or injury caused by insufficient strength of the support structure or improper installation. DXR15/DXR12/DXR10/DXR8/DXS15/DXS12 Owner's Manual 9