Yamaha E1005 E1005 Owners Manual Image - Page 7
Signal Source
View all Yamaha E1005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
SETUP BASIC SETUP 2. Basic setup for using the El 005 between the echo send output and the echo return input of a mixer or mixing console. (Note that in this setup, the E1005 Mixing control has no effect since the Delay Only output is used. Direct and delayed signals are blended, as desired, using the echo/effects return circuity in the mixer.) NC, Ctnrclit, 0• 0 OD OD 74.70 CUT, 007 MICS, INSTRUMENTS, TAPES, ETC. ECHO SEND OUTPUT CHANNEL INPUTS MIXER ECHO/EFFECTS RETURN (OR CHANNEL INPUTi LINE OUT TO AMPLIFIERS & SPEAKERS, TAPE RECORDERS, ETC. CONNECTIONS AND BASIC CONTROL SETTINGS Signal Source Input A Control Mixer echo/ effects output #0 (Use Input B) Input B Control as required for proper display level Mic/Inst Svc. Inst SPECIAL SETUP 3. Special setup for using the El 005 to create stereo from a mono source. The El 005 outputs feed either two instrument amplifiers, or a stereo mixer with two echo/effects returns (or two of the mixer's input channels). Both the E1005's Output and Delay Only Output jacks are used. (For more information on connections and basic control settings, refer to the charts in BASIC SETUP 1 and 2.) ° OMAHA • PO.O9 •On11CfF -. •° ""'" . . . .• . 1' 1' .I.ID.„. „O.D._ MIC ---_ .. . . T ii, • MEI CHANNEL 1 AMP INPUT la OR MIXER INPUT EITHER MIXER, INST OR MIC CHANNEL 2 AMP INPUT OR MIXER INPUT 6