Yamaha EF2400iS Owners Manual - Page 22

Battery Charging, the generator may be damaged.

Get Yamaha EF2400iS - Inverter Generator PDF manuals and user guides View all Yamaha EF2400iS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

2 1 AE00904 Battery Charging cC Do not use AC and DC power at the same time or the generator may be damaged. 761-086a 762-046 12v 762-047 w q 763-238a NOTE: The generator DC rated voltage is 12V. 1. Wind the battery charging lead 2 or 3 turns around the handle and plug into DC receptacle. NOTE: 9 Make connections to the battery after starting the engine. 9 Clamp the red wire to the positive (+) terminal and the black wire to the negative (-) terminal of the battery. Do not reverse these positions. 1 Red 2 Black 2. Start the engine. 3. Press in the DC protector and install the battery. cC 9 Be sure the battery leads are properly connected. 9 Be sure the breather hose is properly connected and is not damaged or obstructed. 9 Reduce the load to the specified generator rated output if the DC protector turns off. If it turns off again, consult a Yamaha dealer. NOTE: Press to reset the DC protector. 1 "ON" 2 "OFF" NOTE: 9 At full charge, electrolyte specific gravity is between 1.26 and 1.28. 9 Check specific gravity hourly. - 17 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
–
17
–
761-086a
762-046
1
2
12v
762-047
763-238a
q
w
AE00904
Battery Charging
c
C
Do not use AC and DC power at the same time or
the generator may be damaged.
NOTE:
The generator DC rated voltage is 12V.
1.
Wind the battery charging lead 2 or 3 turns around
the handle and plug into DC receptacle.
NOTE:
9
Make connections to the battery after starting the
engine.
9
Clamp the red wire to the positive (+) terminal and
the black wire to the negative (-) terminal of the
battery. Do not reverse these positions.
1
Red
2
Black
2.
Start the engine.
3.
Press in the DC protector and install the battery.
c
C
9
Be sure the battery leads are properly connect-
ed.
9
Be sure the breather hose is properly connect-
ed and is not damaged or obstructed.
9
Reduce the load to the specified generator
rated output if the DC protector turns off. If it
turns off again, consult a Yamaha dealer.
NOTE:
Press to reset the DC protector.
1
“
ON
”
2
“
OFF
”
NOTE:
9
At full charge, electrolyte specific gravity is
between 1.26 and 1.28.
9
Check specific gravity hourly.