Yamaha ELS-02C Owner's Manual - Page 82
To erase one instrument, Keyboard Percussion set.
View all Yamaha ELS-02C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Keyboard Percussion 6 Assign an instrument to a particular key or pedal by simultaneously holding down the desired instrument name in the display and pressing the key (or pedal) to which the instrument is to be assigned. The key to which the instrument is to be assigned To erase one instrument: Simultaneously hold down the [CLEAR] button in the display (ASSIGN Page) and press the key (or pedal) corresponding to the instrument you wish to erase. Instrument Name Hold down the Instrument name... Press the key. When the assignment is complete, the key name and instrument name is displayed at the top of the display. The assignments are saved to the User memory selected in step 2 (in this example, User 1). 7 Repeat the operation steps above as necessary to construct your own User Keyboard Percussion set. 8 From the Menu page of Keyboard Percussion, select the User number which you wish to use for your performance. When you select "User 5" on the K.B.P. [1] page for example, pressing the KEYBOARD PERCUSSION [1] button will call up the User 5 of the Keyboard Percussion. NOTE The User Keyboard Percussion data cannot be stored to Registration Memory; only the on/off status of the [1]/[2] buttons and which Keyboard Percussion kit (from Preset 1 - 2 and User 1 - 40) is selected can be stored there. When you want to save the User Keyboard Percussion data together with the current Registration Memory data, execute the Save operation to the USB flash memory (page 118). All 40 User Keyboard Percussion kits can be saved for each Unit separately. NOTICE The Keyboard Percussion setting you have created is automatically saved when you switch to another display. While data is being saved, the square at the top left of the display turns light blue for a few seconds. Do not turn the power off while the Keyboard Percussion settings are being saved. To erase all instruments: You can clear all assignments using the [CLEAR] button in the display (ASSIGN Page). 1 Press, then release the [CLEAR] button. The following display appears, prompting confirmation of the operation. 2 Press [CLEAR] in the display to erase all data. When [CLEAR] is selected, a "Completed" message momentarily appears on the display. Press [CANCEL] in the display to abort the operation. 82 ELS-02/ELS-02C Owner's Manual