Yamaha EMX860ST Owner's Manual - Page 11

5 AUX IN/TAPE IN jacks These are input jacks that allow the signal from an external device to be added to the MAIN output. • AUX IN jacks: Connect these jacks to the output jacks of an external effects processor. If the effects processor has a stereo output, connect it to the AUX IN L (MONO) and R jacks. If it has monaural output, use the AUX IN L (MONO) jack. Signal input to these jacks is sent to the ST bus. • TAPE IN jacks: Use these jacks to connect a stereo device, such as a cassette player or a CD player. The signals input to these jacks is sent to the ST bus. The nominal input level and impedance are -10 dB/ 600Ω for the AUX IN jack, and -10 dBV/600Ω for the TAPE IN jacks. 6 REC OUT/MONITOR/MAIN (STEREO) jacks These are output jacks which send line level signals from the EMX860ST to external devices. A stereo recording device such as a cassette recorder or MD recorder can be connected to the REC OUT jacks, and a playback device such a power amp can be connected to the MONITOR and MAIN (STEREO) jacks. The signals sent from each jack are as follows. • REC OUT jacks: The ST bus signal before it has passed through the MASTER control and graphic equalizer • MONITOR jack: The MONI bus signal which has passed through the Monitor MASTER control and graphic equalizer • MAIN (STEREO) jack: The ST bus signal which has passed through the Main MASTER control and graphic equalizer The nominal output level and impedance are -10 dBV/10 kΩ for the REC OUT jacks, and +4 dB/10 kΩ for the MONITOR/MAIN (STEREO) jacks. Input/output panel 11 EMX860ST-Owner's Manual