Yamaha EMX860ST Owner's Manual - Page 22

22 Specifications s Input specifications Input connectors PAD Actual load impedance Nominal impedance Sensitivity*1 Input level Nominal level Max. before cliping Connector type CH INPUT (Lo-Z) (CH1-6) CH INPUT (Hi-Z) (CH1-6) OFF ON OFF ON MIC INPUT (CH7, 8) LINE INPUT (CH7, 8) (L, R) 3 kΩ 10 kΩ 3 kΩ 10 kΩ 50-600Ω Mics -62 dB (616 µV) -50 dB (2.45 mV) -20 dB (77.5 mV) XLR-3-31 600Ω Lines -32 dB (19.5 mV) -20 dB (77.5 mV) +10 dB (2.45 V) type*2 50-600Ω Mics -52 dB (1.95 mV) -40 dB (7.75 mV) -10 dB (245 mV) Phone jack 600Ω Lines -22 dB (61.6 mV) -10 dB (245 mV) +20 dB (7.75 V) (TRS)*2 50-600Ω Mics -62 dB (616 µV) -50 dB (2.45 mV) -20 dB (77.5 mV) XLR-3-31 type*2 600Ω Line -22 dB (61.6 mV) -10 dB (245 mV) +20 dB (7.75 V) Phone jack*3 TAPE IN (L, R) 10 kΩ 600Ω Line -22 dBV (79.4 mV) -10 dBV (316 mV) +17.8 dBV (7 V) Phono jack AUX IN (L, R) 10 kΩ 600Ω Line -22 dB (61.6 mV) -10 dB (245 mV) +20 dB (7.75 V) Phone jack*3 *1. Sensitivity is the lowest level that can produce an output of +4 dB (1.23 V) or the nominal output level when the unit is set at maximum gain. (All level controls are at maximum position.) *2. Balanced. *3. Unbalanced. • 0 dB=0.775 Vrms, 0 dBV=1 Vrms. s Output specifications Output connectors Actual source impedance MAIN AMP OUT (L, R) (A, B) MAIN BTL OUT MONITOR AMP OUT (A, B) MAIN OUT (L, R) MONITOR OUT EFFECT OUT REC OUT (1, 2) 0.1Ω 0.1Ω 0.1Ω 600Ω 600Ω 600Ω 600Ω • All output jacks are unbalanced. • 0 dB=0.775 Vrms, 0 dBV=1 Vrms. Nominal impedance 4/8Ω Speaker 8Ω Speaker 8Ω Speaker 10 kΩ Lines 10 kΩ Lines 10 kΩ Lines 10 kΩ Lines Output level Nominal Max. before cliping Connector type 37.7 W/4Ω 75.4 W/8Ω 37.7 W/4Ω +4 dB (1.23 V) (200 W/4Ω) (400 W/8Ω) (200 W/4Ω) +20 dB (7.75 V) Phone jack Phone jack Phone jack Phone jack +4 dB (1.23 V) +20 dB (7.75 V) Phone jack +4 dB (1.23 V) +20 dB (7.75 V) Phone jack -10 dBV (316 mV) +10 dBV (3.16 V) Phono jack Specifications are subject to change without prior notice. EMX860ST-Owner's Manual