Yamaha GX-5 Owner's Manual - Page 11
Placing The System, Warning - gx5
View all Yamaha GX-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
PRECAUTIONS: READ THIS BEFORE OPERATING YOUR UNIT NOTE Please check the copyright laws in your country to record from records, compact discs, radio, etc. Recording of copyright material may infringe copyright laws. CAUTION FOR CARRYING THIS UNIT Be sure not to carry or tip this unit with discs remaining in it. CAUTION FOR MOVING THIS UNIT Before moving this unit, first remove all discs from the disc table and close the table by pressing the OPEN/CLOSE button, and then switch off the power by pressing the POWER switch, and last, after you confirm that "no disc" is illuminated on the display, disconnect the power plug from the AC outlet. The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off. WARNING DANGER Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. As the laser beam used in this unit is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. DANGER: The use of optical instrument with this product will increase eye hazard. PLACING THE SYSTEM Placing examples TCD-GX5 KMA-GX5 KMA-GX5 TCD-GX5 This system can be placed any way you like. If, however, you will place another unit or any object on top of KMA-GX5, be sure and prevent the ventilation holes on the top panel of it from being obstructed. If doing so, it may be damaged. Notes • If the system is put in a rack, allow a space of at least 5 cm (1-15/16") above and behind the system. • Disconnect the AC supply lead from the AC outlet before connecting or disconnecting any component. 3