Yamaha GX-5 Owner's Manual - Page 19
Direct-selection play, COMPACT DISC PLAYER OPERATION
View all Yamaha GX-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
COMPACT DISC PLAYER OPERATION To interrupt playback 1 Press the play/pause button. * The " " indicator will flash. 2 Press the play/pause button to resume playback from the same point. To stop playback Press the stop button. To switch the unit off after use Turn the unit off by pressing the POWER switch. (The indicators will go off except for the current time display.) Direct operation Even when an input source other than CD player is selected, pressing the play/pause button, a disc selector button, a track number input button or the RANDOM play button, or pressing the front edge of the disc table gently will start playback directly. In this case, if the tape deck is playing back a tape, it will be stopped automatically. * These ways of playback can also be used to close the disc table. If the table is closed in these ways, playback will begin automatically, however, the display will not show the total number of tracks and the total playing time of the disc to be played. PLAYXCHANGE During playback, you can open the disc table by pressing the PLAYXCHANGE button without interrupting disc playback. However, in this case, pressing the DISC SKIP button on the remote control transmitter has no effect. Precautions • If TV or radio interference occurs during CD player operation, move the unit away from the TV or radio. • Subjecting the unit to shock or vibration can cause mistracking. • Playing some compact discs at high volume can cause mistracking. In this case, listen at lower volume. • Do not pull open the disc table forcibly with your hands. • Do not push the disc table while it is moving. • If the power fails while the table is open, wait until the power supply returns or gently push the table manually to close it. • The temperature range for playing compact discs is recommended to be 5°C (41°F) - 35°C (95°F). CD/TUNER 1 2 3 4 5 1 2 3 4 5 6 7 8 6 7 8 9 0 A TIME B PROG C TAPE D EDIT E +I0 DISC SKIP STOP PLAY/PAUSE MODE REPEAT RANDOM OPEN/CLOSE TUNER LOCATION PLAY STOP PLAY MUSIC TAPE USER FLAT REC/PAUSE DECK A/B POWER SLEEP INPUT VOLUME - + CD/TUNER 1 2 3 4 5 1 2 3 4 5 6 7 8 6 7 8 9 0 E +I0 Direct-selection play By using the track number input buttons on the remote control transmitter, any track you wish to listen to can be played directly. Use the track number input buttons to select the desired track number. Play will begin automatically. A. For example, to choose selection 5 Press the "5" button. B. For example, to choose selection 12 (1) Press the "+10" button. (2) Within 3 seconds, press "2" button. C. For example, to choose selection 20 (1) Press the "+10" button. (2) Within 3 seconds, press the "+10" button again. (3) Within 3 seconds, press the "0" button. Note A track number higher than the number of tracks on the disc cannot be selected. Also, if a higher track number is selected while the disc table is open, play will begin from the last track on the disc when the disc table is closed. 11