Yamaha GX-5 Owner's Manual - Page 16

CONNECTIONS RL Speaker connection Connect each speaker wire to the SPEAKERS terminals. Cautions • Do not let the bare speaker wires touch each other as this could damage the power amplifier and/or speakers. • When connecting the speakers to the unit, be sure to connect the speaker wires properly. Do not make a mistake from the right channel to the left channel and from the plus (+) terminal to the minus (-) terminal. • Do not connect these SPEAKERS terminals to speakers other than the provided speaker system NX-GX5. System connection (See figure 9 on page 8.) Connect the red connector on the rear of TCD-GX5 to the red socket on the rear of KMA-GX5. How to disconnect the system connector Grasp both sides of the connector to disconnect the connector. Connecting the AC supply lead (See figure 0 on page 8.) • After connecting the speakers and system connectors, plug the AC supply lead into a convenient AC outlet. • Unplug the AC supply lead from the AC outlet if the unit is not to be used for a long period of time. TURNING THE POWER ON/OFF TO THIS SYSTEM (See figure A on page 8.) If the AC supply lead is connected to the AC outlet, this system can be turned ON and OFF (STANDBY mode) by pressing the POWER switch on the front panel of TCD-GX5 or the POWER switch on the remote control transmitter. Automatic power-off function The power of this system will be automatically turned off if there is no operation on the control parts of this system, no illumination on the graphic equalizer indicators and no playback of CD or tape for about 30 minutes. STANDBY mode While the power is on, pressing the POWER switch (or the POWER switch on the remote control transmitter) switches the system to the STANDBY mode. (In this mode, the display shows only the time.) In this mode, main voltage is still present inside the system. If you want to switch off the system completely, disconnect the AC power plug from the AC outlet. 8