Yamaha GX-505 Owner's Manual - Page 27

English Tuning operation 5, 3 Automatic tuning DISC1 DISC2 DISC3 1 Turn on the power. 3-DISC CD CHANGER 2 Press INPUT or until "TUNER" (2, 7) appears on the display, or simply press TUNER on the remote control. 1 STANDBY / ON STANDBY TIMER 3 Select the reception band (FM or AM) by pressing PRESET/ TUNING/BAND (or TUNER on the remote control), and 2 INPUT PRESET/TUNING/BAND A/B/C/D/E / confirm it on the display (2). * Do not select the preset tuning mode (in which "PRESET" (1) lights up on the display). 3 4 Press AUTO/MANUAL so that "AUTO" (4) lights up on the PHONES BASS TREBLE MODE DOLBY NR REC/ PAUSE AUTO/ MANUAL MEMORY RAN display. TIMER TIME ADJ HO 5 Press to tune to a higher frequency, or press to tune to a 2, 4 lower frequency. (When tuned in to a station, "TUNED" (5) will light up on the display.) POWER 1 1 2 3 1 2 3 4 5 6 6 If the station where tuning search stopped is not the desired one, follow step 5 again. * If the tuning search does not stop at the desired station, change to the Manual tuning method as described below. * "STEREO" (3) will light up when an FM stereo broadcast with sufficient signal strength is received. 4 5 6 7 8 9 2 7 8 0 TUNER +I0 Direct operation TUNER on the remote control will work if it is pressed when this system is in the standby mode or another input source is selected. PRESET PRESET TIME PROG R.TIME A EDIT B C DISC SKIP MODE Manual tuning D E 1 Follow steps 1-3 of the Automatic tuning method. CD 2 Press AUTO/MANUAL so that "AUTO" (4) disappears from / the display. DIRECTION TAPE REC/ PAUSE 3 Press and hold to tune to a higher frequency, or press and hold to tune to a lower frequency. Release the button just before reaching the desired frequency, and then press it repeatedly until the desired frequency appears. (When tuned in to a station, "TUNED" (5) will light up on the display.) YMERSION MUSIC Note If you tune in to an FM station manually, it is received in monaural to increase the signal quality. SLEEP INPUT 2 VOLUME E-17