Yamaha GX-505 Owner's Manual - Page 35

English DISC1 DISC2 DISC3 1 3-DISC CD CHANGER STANDBY / ON STANDBY TIMER INPUT PRESET/TUNING/BAND A/B/C/D/E / 4 PHONES BASS TREBLE MODE DOLBY NR REC/ PAUSE AUTO/ MANUAL MEMORY RANDO TIMER TIME ADJ HOUR DIRECTION AUTO REVERSE CASSETTE DECK DOLBY B NR OPEN/ CLOSE Recording Recording from CDs utilizing the EDIT function The EDIT function performs recording on both sides of the tape. s EDIT recording 1 Press INPUT or repeatedly until "CD" (1) appears on the display, and load the disc to be recorded. 2 Select the disc by pressing DISC SKIP. 3 Load a tape on the tray with side A facing upward. 4 Select " " (4) by pressing MODE. 5 Press R. TIME on the remote control to select the length of the tape to be used. When pressed, the display changes as shown below. (off) → C-46 → C-54 → C-60 → C-90 → 3 Numeric buttons POWER 1 2 3 1 2 3 4 5 6 4 5 6 7 8 9 7 8 0 TUNER +I0 PRESET PRESET TIME PROG R.TIME 5 A B C EDIT DISC SKIP MODE 2 6 D E CD / DIRECTION When using tapes other than C-46, C-54, C-60 or C-90 After pressing R. TIME, input the tape length by using the numeric buttons on the remote control. 6 Press EDIT. ("EDIT" (8) lights up on the display.) The following operations are carried out automatically. 1) Tracks on the disc are automatically divided into side A and side B. You can check the process by watching the display. * The tape side indicator (9) shows the side currently selected. 2) If the tape is not rewound to the end, it will rewind to the end rapidly. 3) The end part of the tape on which recording cannot be done is automatically wound. 4) Both disc play and recording starts. Recording is continuously carried out on both sides of the tape. Note When the CD player is in the all disc play mode, tracks on another disc are recorded continuously if the tape's total possible recording time is longer than the total playing time of the selected disc. In this case, as many as three discs can be recorded automatically. TAPE REC/ PAUSE YMERSION SLEEP MUSIC INPUT 1 VOLUME E-25